Pioneer SA-1060 Manuel d'utilisation - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Pioneer SA-1060. Pioneer SA-1060 11 pages.

READ
INSTRUCTIONS
All
the
safety
and
operating instructions should
be read before the
appliance is operated,
RETAIN
INSTRUCTIONS
The operating instruc-
tions should be retained for future reference.
HEED
WARNING
All warnings on the appliance
and in the operating instructions should be adhered
to.
FOLLOW
INSTRUCTIONS
All operating and use
instructions should be followed.
WATER
AND
MOISTURE
The appliance should
not be used
near water
for example,
near a
bathtub, washbowl, kitchen sink, laundry tub, in a
wet basement, or near a swimming pool, etc.
LOCATION
The appliance should be installed in a
stable location.
WALL OR CEILING MOUNTING
— The appliance
should not be mounted to a wall or ceiling.
VENTILATION
— The appliance should be situated so
that its location or position does not interfere with
its proper ventilation.
For example, the appliance
should
not be situated
on a bed, sofa,
rug, or
similar surtace that may block the ventilation open-
ings; or, placed in a built-in installation, such as a
bookcase or cabinet that may impede the flow of
air through the ventilation openings.
HEAT
— The appliance should be situated away from
heat
sources
such
as
radiators,
heat
registers,
stoves, or other appliances
(including amplifiers)
that produce heat.
POWER
SOURCES
The appliance should be con-
nected to a power supply only of the type describ-
ed in the operating instructions or as marked on the
appliance.
POWER-CORD
PROTECTION
— Power-supply cords
should be routed so that they are not likely to be
walked
on or pinched
by items
placed
upon
or
against them, paying particular attention to cords
at plugs, convenience
receptacles, and the point
where they exit from the appliance.
POLARIZATION
If your purchased product is pro-
vided with a polarized power plug, please read the
following
instructions.
This product
is equipped
with a polarized alternating current line plug (a plug
having one blade wider than the other). This plug
will fit into the power outlet only one way. This is a
safety feature. If you are unable to insert the plug
fully into the outlet, try reversing the plug. If the
plug should still fail to fit, contact your electrician
to replace your obsolete outlet. Do not defeat the
safety purpose of the polarized plug.
CLEANING
The appliance should be cleaned only
with a polishing cloth or a soft dry cloth. Never
clean with furniture wax,
benzine, insecticides or
other volatile liquids since they may
corrode
the
cabinet.
IMPORTANT 1
The
lightning
flash
with
arrowhead,
within
an
equilateral triangle, is intended to alert the user of the
presence of uninsulated "dangerous voltage" within the
product's enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
IMPORTANT 2
If the apparatus is fitted with AC mains power outlet(s),
see REAR PANEL
FACILITIES for convenient connec-
tion of additional Hi-Fi component(s). Make all connec-
tions to the AC outlet(s) and the signal terminals first.
Connect the plug to the wall socket last, make sure that
the power switch is off. Disconnect the wall plug when
the equipment
is not in (regular) use, e.g. when
on
vacation.
The appliance does not appear to operate normally
or exhibits a marked change in performance; or
e
The appliance has been dropped; or the enclosure
damaged.
SERVICING
— The user should not attempt to service
the
appliance
beyond
that
described
in
the
operating instructions. For all other servicing, con-
tact the nearest Pioneer authorized service center.
a)
Use No. 10 AWG
(5.3 mm?)
copper,
No.
8 AWG
(8.4
mm?)
aluminum,
No.
17
AWG
(1.0
mm?)
copper-
clad steel, bronze wire, or
larger as ground wire.
b)
Secure antenna lead-in and
STAND
OFF
iz
r y
INSULATORS b
ground wires to house with
stand-off insulators spaced
from 4 feet (1.22 meters) to
6 feet (1.83 meters) apart.
c)
Mount
antenna
discharge
ANTENNA
unit as closely as possible to
LEAO-IN
WIRE
.
where lead-in enters house.
10 EXTERNAL ANTENNA?
d}
Use jumper wire not smaller
than No.6 AWG (13.3 mm?)
copper or equivalent when
ee EMA GE UNIT €
separate
antenna-ground-
ing electrode is used.
POWER LINES
SERVICE
ENTRANCE
CONDUCTORS
+
GROUND
WIRE 3._
a
4
GROUNO
)
WIRE 2.b
POWER SERVICE
GROUNDING ELECTRODE SYSTEM
f e . g
interior
m e t a l
w a t e r
p a p e ?
1
DRIVEN
B FEET (2.44 mi
aOMPEn
I
INTO THE EARTH
IF
u
REQUIRED BY
i
LOCAL CODES. SEE
FIG.A
U
NEC SECTION 610-21 (1)
CAUTION
RISK OF ELECTRIC
SHOCK
DO NOT OPEN
ING TO QUALIFIED SERVICE PERSONNEL.
Blue:
Neutral
oured black.
The wire which is coloured brown must be connected to
the terminal which is marked with the letter L or col-
oured red.
Brown:
Live
Equipment sold in the U.K. is not supplied with a
power plug.