Pioneer VSA-E03 Manuel d'utilisation - Page 15

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Pioneer VSA-E03. Pioneer VSA-E03 48 pages. Audio/video multichannel amplifier

Imprimer la page

SPEAKER setting mode

Establishes the size and configuration of the speaker system you have connected.

In the display, "F", "C", and "S" refer to front, center, and surround speakers respectively. Speaker size is denoted as

"L" for large speakers, "S" for small speakers, and "

memo

If the cone size of your speaker is larger than 12 cm, please set to Large.

SIGNAL

SELECT

ANALOG

SIGNAL

SELECT

ANALOG

SIGNAL

SELECT

ANALOG

* Press ⁄ to advance to the

next setting, and press ! to

return to previous setting.

∗

Press % or ﬁ to set the front speaker.

Front speaker (initial setting is "L (Large)")

• Select "FL" if your speakers will reproduce bass frequencies effectively or

if you did not connect a sub woofer.

• Select "FS" to send bass frequencies to the sub woofer. (The center and

surround speakers cannot be set to Large if the front speakers are set to

Small. In this case, all bass frequencies are sent to the sub woofer.)

Press % or ﬁ to set the center speaker.

Center speaker (initial setting is "L (Large)")

• Select "CL" if your speaker will reproduce bass frequencies effectively.

• Select "CS" to send bass frequencies to the other speakers or sub woofer.

• Select "C

center channel is output from the front speakers.

Press % or ﬁ to set the surround speaker.

Surround speaker (initial setting is "L (Large)")

• Select "SL" if your speakers will reproduce bass frequencies effectively.

• Select "SS" to send bass frequencies to the other speakers or sub woofer.

• Select "S

sound of the surround channels is output from the front and center

speakers.

" (asterisk) if no speaker is connected.

∗

" if you did not connect a center speaker. In this case, the

∗

" if you did not connect surround speakers. In this case, the

Preparations