Pioneer CDJ-1000 Manuel d'utilisation - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Pioneer CDJ-1000. Pioneer CDJ-1000 20 pages. Compact disc player
Également pour Pioneer CDJ-1000 : Manuel de formation (30 pages)

Imprimer la page

BEFORE OPERATIONS

FEATURES

The CDJ-1000 compact disc player is designed for use by DJs providing all the func-

tions and performance required in disco clubs while offering performance, sound

quality and functionality superior to any analog player.

JOG DIAL

The large 206 mm diameter Jog dial enables better handling than

an analog turntable.

PITCH BEND

This function changes the music tempo depending on direction of Jog dial rotation

and speed of movement.

SCRATCH PLAY

In the VINYL mode when the surface of the Jog dial is pressed playback is discon-

tinued and then continues according to the direction and speed the dial is rotated.

You can also adjust the startup when the Jog dial is touched and released to create

new DJ techniques.

FRAME SEARCH

Moves the disc from pause position in frame increments (1/75 sec) when the Jog

dial is rotated in pause mode.

SUPER FAST SEARCH

You can search the disc faster than normal search or track search by holding down

a MANUAL SEARCH button or TRACK SEARCH button as you turn the Jog

dial.

ON JOG DISPLAY

The display at the surface of the Jog dial shows disc turning status, current track,

memory cue loop for each track (when engaged), Jog mode, etc.

WAVE DISPLAY

This display makes it possible to find the breakpoint between tracks in advance and

use it as mix point or end point in the same way as you can on an analog record by

checking the position of the needle in the groove.

CUE/LOOP MEMORY

This unit can store cue points of each disc in internal memory or on a Multimedia

Card (MMC) (sold separately) that can be recalled for each disc.

HOT CUE

Provides instant start from any of three pre-selected hot cue points (A, B or C).

REVERSE PLAY

Set the DIRECTION switch to its forward position ([REV] position) to play the

music backwards.

TEMPO CONTROL

100 mm high-precision slider coupled with a 0.02% increment digital

display (within a ±6% range) allows exact control of speed to make tempo adjust-

ments easy and accurate.

TEMPO CONTROL RANGE

The maximum variable range can be set to four variable ranges: ±6%, ±10%,

±16% and ±24% to facilitate adjustment.

TEMPO CONTROL RESET

Resets the tempo to 0% regardless of slider position.

MASTER TEMPO

Changes music tempo without changing pitch.

CUE

BACK CUE

After storing the Cue point in memory, press the CUE button while playing the unit

to go back to the Cue point and start over.

AUTO CUE

Auto cue automatically locates the song's start point even if it differs from the track's

frame, allowing the player to start instantly at a press of the PLAY button.

CUE POINT SAMPLER

The sound from the memorized cue point can be reproduced by one touch, which

can be used as the start point check and the sampler.

REAL TIME SEAMLESS LOOP

This function simplifies setting and releasing loops. This function lets you set a

loop while you are playing a track. A loop can also be set at the end of the track so

that the track does not stop. In addition, an ADJUST mode has been added to

enable one-touch adjustments to Loop-in and Loop-out points and facilitate loop

operation.

RELOOP

Allows you to replay a loop any number of times.

Press the RELOOP button after releasing loop play to return to the loop start point.

Clever use of on and off in combination with the rhythm make it possible to create

new sound effects.

PLAYING ADDRESS

This bar graph provides a visual representation of track playback progress that

enables you to see current playback position just like you can on an analog record

by checking needle position. The length of the bar shows current position and a

flashing bar provides advance notice of track end.

SLOT IN

Discs are loaded directly without opening doors or trays, making track selection

that much faster.

FADER START

Quick start and back cue can be performed using the fader function on DJ mixers

DJM-500, DJM-600 and DJM-300 (all mixers are sold separately).

MULTI READ

CD-R, CD-RW discs can be replayed. (However, due to certain special characteris-

tics of some discs, recorders as well as dirty or damaged discs, some discs may not

replay properly.)

CD TEXT

CD TEXT informations are displayed if the CD includes the CD TEXT information.