Pioneer CDJ-1000 Manuel de formation - Page 24

Parcourez en ligne ou téléchargez le pdf Manuel de formation pour {nom_de_la_catégorie} Pioneer CDJ-1000. Pioneer CDJ-1000 30 pages. Compact disc player
Également pour Pioneer CDJ-1000 : Manuel d'utilisation (20 pages)

Imprimer la page

@ Mode for checking the error log

If any abnormality occurs in normal use, the following error numbers are displayed in the display block.

• How to check the error log

Error Check Mode : ON

POWER SW

POWER ON

FL display

• If a JOG dial is rotated on the right, it will become error display mode.

FL display

• By entering this mode, the latest 16 errors can be checked.

In this mode, an error breakdown code is displayed in the minute display block, and the address where that error breakdown

code is stored in the memory of the microcomputer is displayed in the second and frame display block (in hexadecimal

notation).

The error breakdown code of the latest error is stored at address FFDF20, and that of the oldest error is stored at address

FFDF2F. You can change the address by turning the Jog dial from FFDF20 to FFDF2F (initial value: FFDF20).

Error No.

E-6001

FPGA PROGRAM

DOWNLOAD ERROR

E-6002

DSP PROGRAM

DOWNLOAD ERROR

E-7201

TOC READ ERROR

E-8301

PLAYER ERROR

(startup problem)

E-8302

PLAYER ERROR

(playback problem)

E-8303

PLAYER ERROR

(problem in writing in the buffer)

E-9101

MECHANICAL TIME OUT

* If this error occurs before the inserted disc is recognized as a CD, the disc is automatically ejected. In this case, the error

code No. is not displayed, but you can see the error breakdown code stored in memory. Only in the case of breakdown

code 20 (the spindle motor does not rotate), the disc will not be ejected, because this is not a problem of the media.

Error Check Mode : CANCEL

POWER OFF

RELOOP/EXIT

Hold it pressed for 10 seconds.

address

Error Name

61: The program cannot be written in the FPGA.

62: The program cannot be written in the DSP.

26: The TOC data cannot be read.

11: Any error occurring before disc recognition and leading to operation stop

20: The spindle motor does not rotate.*

21: No disc (focus error level: low)*

24: The address cannot be read.*

12: Your desired address cannot be searched.

15: The address cannot be read.

22: The focus servo cannot close.

23: The tracking servo cannot close.

99: Problem in writing in the buffer

90: Abnormality in the disc-loading mechanism (timeout)

Error Breakdown

is categorized as this error.*