Pioneer CDJ-800MK2 Manuel d'utilisation - Page 21

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Pioneer CDJ-800MK2. Pioneer CDJ-800MK2 24 pages. Compact disc player
Également pour Pioneer CDJ-800MK2 : Manuel d'entretien (4 pages)

Imprimer la page

Troubleshooting

Incorrect operations can be mistaken as malfunctions. If you believe the unit is not operating correctly, consult the chart below. Sometimes incorrect

operation may be due to a malfunction in another component. If the problem is not fixed, check the other components used with the player. If the

problem still persists, contact your nearest Pioneer authorized service center or dealer for service.

Symptom

Disc doesn't eject even when

EJECT button (0) is pressed.

Play doesn't commence even when

the disc is inserted.

Playback immediately stops when

started.

MP3 can't be played.

Can't search for MP3 tracks.

No sound is audible.

Sound is distorted, noise is output.

With certain discs, loud noise is

produced or play stops.

When the auto cue function is set

ON, track search is not finished.

Back cue function cannot be carried

out even though the CUE button is

pressed in playback mode.

Pressing the LOOP OUT button

does not start loop play.

The jog dial does not operate as

desired.

The picture of the TV screen is

fluctuated or FM broadcast is

interfered with noise.

The disc is not rotating when power

is ON.

¶ This component may fail to operate properly due to influence of static electricity or other external influences. In this case, try turning

off the POWER switch, and turn on the power again only when the disc has fully stopped rotating.

¶ This unit cannot play partially recorded CD-R or CD-RW discs that have not been finalized.

¶ This unit plays only standard 12 cm discs and 8 cm discs mounted in proper disc adapters; it cannot play irregularly shaped discs

(damage or malfunctions may occur).

¶ BPM values measured with this unit may differ from published values found on CD labels, or those measured on Pioneer DJ mixers.

This is a result of differences in BPM measuring methods, and is not a malfunction.

¶ When playing CD-R/RW discs, some degradation in performance may be experienced depending on the recording quality of the

individual disc.

Probable Diagnosis

¶ Power plug is disconnected from outlet.

¶ The auto cue function is set to on.

¶ Disc is loaded upside down.

¶ Smudges on the disc, etc.

¶ Format is wrong.

¶ You attempted to search (fast forward/reverse) for

files in a different folder.

¶ Output cables are connected incorrectly or are

loose.

¶ Incorrect operation of audio mixer.

¶ Pin plugs and/or terminals are dirty.

¶ Player is in pause mode.

¶ Output cables are connected incorrectly or are

loose.

¶ Pin plugs and/or terminals are dirty.

¶ Interference is being picked up from a TV set.

¶ Disc has a bad scratch or warp.

¶ Disc is extremely dirty.

¶ If the sound muted portion between selections is

long, searching time will be long.

¶ If the point cannot be found within ten seconds,

the cue point is set at the track's beginning.

¶ The cue point is not set yet.

¶ In the case of MP3, back cue cannot be per-

formed if no cue point is located within the

currently playing folder.

¶ No cue points (or loop-in points) have been set.

¶ In the case of MP3, loop cannot be performed if

no loop-in point is located within the currently

playing track.

¶ Incorrect JOG MODE (VINYL/CDJ) is set.

¶ Interference is being picked up from the CD

player.

¶ The disc rotation stops automatically if no

operation has been performed for 100 minutes or