AEONS Technologies SA 06 Series Manuel du propriétaire - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} AEONS Technologies SA 06 Series. AEONS Technologies SA 06 Series 8 pages. Wall-mounted enclosure

Imprimer la page

Assembly Steps

Step 2:

Install Top Panel and Frames

Place the Top Panel (#1) on a flat surface. Turn the

assembly over and insert it into the top panel.

Ensure that the Top and Bottom Panels (#1 and

#2) are oriented in the same direction.

Overlay the Horizontal rail (#6) so that the

notches interlay with large flanges on

the Front and Rear Frames (#3). Be sure to

orient the Horizontal rail (#6) so that

the flat, cage nut surface is facing inward.

Attach with 8x M8 Hexagon Screws and 8x M8

Flange Nuts.

Step 1:

Install Bottom Panel and Frames

Lay down Bottom Panel (#2) on a flat surface.

insert Front and Rear Frames (#3) with large

flange oriented to the inside. Ensure that the slots

in the center of the frames are facing inward as

shown in the detailed view.

Overlay the Horizontal rail (#6) so that the notches

interlay with large flanges on the Front and Rear

Frames (#3). Be sure to orient the Horizontal rail

(#6) so that the flat, cage nut surface is facing

inward.

Attach with 8x M8 Hexagon Screws and 8x M8

Flange Nuts.