Pioneer CLD-3090 Manuel d'utilisation - Page 39

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Pioneer CLD-3090. Pioneer CLD-3090 41 pages. Cd cdv ld player

TROUBLESHOOTING
WHEN PLAYING BACK A COMPACT DISC
SYMPTOM
CAUSE
REMEDY
16.Player
stops
immediately
after playback is started.
Disc
is loaded
upside
down
(CD,
CDV,
onesided LD discs).
The playing surface of the discs is dirty.
Disc is not properly set on the disc table.
Load the disc correctly with the label side
upward.
Use a soft cloth and lightly wipe off the dirt
from the surface of the disc. If necessary,
moisten a cloth with diluted neutral detergent
to remove heavy dirt or fingerprint.
Set the disc properly.
17. No sound output
The
stereo
amplifier
is not
correctly
connected.
>
You are not operating the stereo amplifier
correctly.
The connection terminals and/or the plugs
of the connection cords are dirty.
The
plugs of the connection
cords
are
disconnected, or are not fully pushed in.
The player is in pause mode.
Connect the amplifier correctly.
Refer to the operating
instructions
for the
amplifier, and operate the amplifier correctly.
Clean the plugs and terminals and connect
again.
Make
sure
that connections
are
made
correctly.
Press PLAY » and restore the player to play
mode.
18. Sound is distorted.
The audio output jacks are connected to the
PHONO jacks.
The connection terminals and/or the plugs
of the connection cords are dirty.
The plugs of the connection cords are not
fully pushed in,
Abnormal functioning of this unit may be caused by
lightning, static electricity, or other external inter-
ference.
To restore normal operation, turn the power
off and then on again, or unplug the AC power cord
and then plug it in again.
40
<VRB1043>
Connect to the AUX, CD, VDP, LD or VCR
jacks.
Clean the plugs and terminals and connect
again.
Push the plug in firmly.