Pioneer CLD-901 Manuel d'utilisation - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Pioneer CLD-901. Pioneer CLD-901 40 pages. Compact disc/laservision player
Également pour Pioneer CLD-901 : Manuel d'utilisation (40 pages)

Imprimer la page

CONNECTING

TO YOUR

TV SET

Connect the VHF OUT terminal of the player to the 75

VHF

antenna

terminal

of your TV set with the

accessory

RF antenna

cable.

If the VHF

antenna

terminal

of your TV set is not an

F type terminal,

modify one end of the cable.

CLD-901

VHF ANT

752 UNBAL

Unit: mm

75 Q coaxial cable preparation

1. Strip the end of the cable as shown in step 1.

2. Prepare the end as shown in steps 2 and 3.

3. Loosen the three screws and insert the cable.

4. Tighten the three screws firmly.

NOTE:

@ Push

the plug in firmly.

If the plug is not properly

pushed in, this may result in snow on the screen or noise.

@ The shape of the VHF antenna

input terminal and the

method of connecting the antenna cable may differ from

one TV set to another.

For details please refer to your TV

instruction manual.

@ The sound output from the VHF OUT terminal is Laser-

Vision Disc analog sound.

This terminal does not allow

the playback of digital sound or Compact Disc sound.

If the VHF antenna input terminal of your TV set is an

IEC terminal,

install the accessory

F-type jack-IEC

plug adaptor to one end of the RF antenna cable and

connect it to the TV set.

To TV set

CONNECTIONS

3. SET THE CHANNEL

SELECTOR

SWITCH

If channel 3 is not being used for broadcasts in your

area, set the channel selector switch to the channel 3

side, or if channel 4 is not being used, set the switch

to the channel 4 side. The setting you choose will be

the disc playback channel.

CONNECTING

TO YOUR

STEREO

AMPLIFIER

Connect

the

CD/LV

audio

output

terminals

of the

player to the AUX or CD input terminals etc. of your

stereo amplifier.

NOTE:

@ Do not connect these terminals to your amplifier PHONO

input terminals.

@ The LV (ANALOG}) audio output terminals do not output

the digital sound from Compact Discs or LaserVision with

Digital Sound Discs.

5. PLUG THE POWER

CORDS

INTO AC

OUTLET

Plug the AC power

cords

of the player, stereo

amplifier and TV set into an AC outlet.

Please

check that the VOLTAGE

SELECTOR

is set

properly.

WHEN

USING A TV MONITOR

(OR A TV SET

WITH VIDEO AND AUDIO

INPUT TERMINALS)

Connect the VIDEO OUT terminal of the player to the

video input terminal of the TV monitor (or TV set).

Connect

the CD/LV

audio output terminals

of the

player to the AUX or CD terminals etc., of your stere

amplifier.

SERS

ESTER

EER

SB TN

A A T E

SRE

TSCA

SSRIS

ETS