Pioneer CLD-M401 Manuel d'utilisation - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Pioneer CLD-M401. Pioneer CLD-M401 40 pages. Multi-play cd cdv/ld player
Également pour Pioneer CLD-M401 : Manuel d'utilisation (40 pages), Manuel d'utilisation (40 pages)

Imprimer la page

1. Features and Functions

CONNECTING TO YOUR STEREO AMPLIFIER

Connect the AUDIO OUT jacks of the player to the AUX,

CD, LD or VDP input jacks of your stereo amplifier.

NOTE:

@ Do not connect these terminals to your amplifier PHONO

input jacks.

Connecting to an optical digital jack

This unit can be connected to an amplifier equipped with an

optical digital jack.

1. Remove the protective dust cap from this unit's OPTICAL

DIGITAL OUT jack.

2. Use an optical fiber cable to connect OPTICAL DIGITAL

OUT jack of this unit to the optical digital input jack of the

amplifier.

@ Align the plug of the optical fiber cable with the optical

digital jack and fully insert the plug to make a secure

connection.

ere

To optical digital

input jack

awe

a(t

@ Use a separately sold optical fiber cable for the optical

digital jack connections. However, when making optical

digital connections, the player can only be connected to

an amplifier which

uses the same

type of optical

transmission/reception module.

Precautions concerning use of optical fiber cables

@ Fully insert the optical fiber cable plugs all the way into

the jacks.

@ Be careful not to fold or crimp the cable. When coiling

an optical fiber cable for storage, make sure the diameter

of the coil is 15 cm (6 inch) or larger.

@ Use an optical fiber cable with a length of 3 m (10 feet}

or less.

@ Protect the optical fiber cable plugs from scratches and

dust.

@ When the unit is not connected using an optical fiber

cable, be sure to keep the protective dust cap plugged

into the optical digital output jack at all times.

(The illustration shows CLD-M450/CLD-M401.)

Stereo pmplisier

5906

Remove the cap.

Optical fiber cable

bAadeletdadatadatateddalailelelakaielaka

ta tatel ttt. ee

PLUG THE POWER CORDS INTO AC OUTLET

Plug the AC power cords of the player, stereo amplifier

and TV set into an AC outlet.

When the power cord of this unit is connected to an AC

outlet, power is supplied to the unit's internal memory

{such as the last memory) even when the POWER switch

is OFF.

Therefore, be sure to connect the power cord

directly to a wali outlet.

If the power cord is connected to

an outlet such as a switched outlet on an amplifier, the

various memory contents will be erased whenever the

amplifier's power switch is turned off.

(The illustration shows CLD-M450/

CLD-M401.)

AC outlet