Pioneer PD-M500 Manuel d'utilisation
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Pioneer PD-M500. Pioneer PD-M500 26 pages. Multi-play compact disc player
Imprimer la page
Operating
Instructions
MULTI-PLAY
COMPACT
DISC PLAYER
Riise
DIGITAL AUDIO
Thank you for buying this Pioneer product.
Piease read through these operating instructions so you will
know how to operate your model properly. After you have
finished reading the instructions, put them away in a safe
place for future reference.
In some countries or regions, the shape of the power plug
and power outlet may sometimes differ from that shown in
the explanatory drawings.
However,
the method
of con-
necting and operating the unit is the same.
WARNING:10
PREVENT
FIRE OR SHOCK
HAZ-
ARD,
DO
NOT
EXPOSE
THIS
APPLIANCE
TO
RAIN
OR
MOISTURE.
IMPORTANT
NOTICE
[For U.S. and Canadian
models]
The serial number for this equipment is jocated on the rear
panel. Please write this serial number on your enclosed war-
ranty card and keep it in a secure
area. This is for your
security.
[For Canadian
model]
CAUTION:10
PREVENT
ELECTRIC
SHOCK
DO
NOT USE THIS (POLARIZED)
PLUG WITH AN EXTENSION
CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE
BLADES CAN BE FULLY INSERTED TO PREVENT BLADE
EXPOSURE.
ATTENTION:rour
preveniR
Les
cHOCcS
ELECTRIQUES NE PAS UTILISER CETTE FICHE POLARISEE
AVEC UN PROLONGATEUR UNE PRISE DE COURANT OU
UNE AUTRE SORTIE DE COURANT, SAUF SI LES LAMES
PEUVENT ETRE INSEREES A FOND SANS EN LAISSER
AUCUNE PARTIE A DECOUVERT.
"This product is manufactured to comply with the radio inter- |
ference
requirements
of EEC
Directive
76/889/EEC
and
| 82/499/EEC."
LINE VOLTAGE
SELECTOR
SWITCH
Only
multi-voltage
models
are
provided
with
this
switch. U.S., Canadian, European, U.K., and Austra-
lian models are not provided with this switch.
Mains voltages in Saudi Arabia are 127V and 220V
only.
Never
use
this model
with
110V
setting
in
Saudi Arabia.
The
line voltage
selector
switch
is located
on the
rear
panei of this player. Before your player is shipped from
the factory,
the switch is set to the power
requirements
of the player's destination.
Check that it is set properly
before
plugging
the power
cord into the outlet.
if the
voltage is not properly set or if you move to an area where
the voltage requirements
differ, adjust the selector switch
as follows:
®
Provide
yourself
with
a
medium-sized
(flat-blade}
screwdriver.
Insert the tip of the screwdriver into the
groove of the selector switch and turn it so that the
power voltage marking of your area points to the arrow.
VOLTAGE
SELECTOR
@) PIONEER'
The future of sound and vision.