Pioneer PD-M610 Manuel d'utilisation - Page 21

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Pioneer PD-M610. Pioneer PD-M610 25 pages. Multi-play compact disc player

Imprimer la page
Remote control unit enables various key function operations from
5. Press Transmission
key.
a distance.
Only remote control unit enables the following functions.
*® Programming into memories A to D on remote control unit.
® Transmit programs in A to D to player.
During program transmission
(the indicator is flashing} the
remote control unit should be aimed at the player,
NOTE:
© ff there are obstacles in the way, the distance too great or the
Normal remote control operation is possible when ali the A to D
appropriate, transmission may not be possible.
memory symbols are fit on the remote control unit display. (Key
¢ The program stored in the player will then be cleared, and the
operations on the remote contro! unit will be transmitted to the
player wilf then enter the stop mode.
player.)
° During transmission, keys other than the PLAY keys cannot be
Even if display is off by AUTO OFF function, the remote contro!
used.
unit can be used normally.
6. Press PLAY key to start.
PROGRAMMING,
TRANSMISSION,
START OF
Operation examples
PLAYBACK
The example shows how to program track 3 on disc 2, track 1 on
disc 3, a pause and track 15 on disc 1 in program
B.
Entering a program
* Programming
1. Press PROGRAM
keys A to D.
Step
Key operations
Indicator display
Make sure that selected PROGRAM
indicator lights.
{Program
|
Basar
8
2. Select DISC NUMBER keys and TRACK NUMBER
mode)
PROGRAM
|B
|
=A bene] HH avue
keys.
i
2
3. Proceed as described in 1 to 2 above to program
pisc no. [2]
a) |
1
ge
the other memories, too.
aut
Four memories from A to D (for four magazines) can be used.
01
B
A total of 64 steps can be stored in memory.
TRACK NO.
eee 3 ay
3 nes
NOTE:
° Program
steps
exceeding
the remote
contro!
unit's
total
BROORAN
s
memory of 64 cannot be stored.
DISC NO.
|3
seid 4 |
>
fa
° Program additions, changes, and clearing that can be done
-
c
with the player can also be done by the remote control unit.
02
¢ Although the program input mode has been set by the PRO-
TRACK NO. [1]
~F
oars #
tA5
GRAM key, the signal can be sent to the player by the following
a
ete,
keys.
TRANSMISSION, PLAY, RANDOM
PLAY, TRACK (@<@, 3B),
on
MANUAL (<@€, be»), FADE fIN, OUT), EJECT and*LEVEL (-,
03
PAUSE
aa
aoe
+). When using other keys than the above, clear the program
FP mog
input mode. {if a program is being input in PROGRAM B, press
8 key to clear the program input mode.)
° If a non-existant song is continuously sent to the player after
mm
PROoRaM.
Lad
'
-
DISC NO. [7
ous
g TRACK
eree
programming,
the player may malfunction.
Lt
i
Al L gf u
Transmission to Player and Start of Playback
04
=a]
The programs
stored in the remote
control
unit is sent to the
TRACI NO:
Te1Gi(8
™
i /
i5
oH
player's program
in single program
units. Programmed
play can
then
be done.
Transl
acd
© Transmission | TRANS}
4. Press PROGRAM
key (A to D) to be transmitted.
*" Start-of programmed' play: | PLAY.
Make sure that selected memory indicator lights.
21
<PRB1IO&8 >
E