Pioneer PDR-W739 Manuel d'utilisation - Page 23

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Pioneer PDR-W739. Pioneer PDR-W739 44 pages. Compact disc recorder / multi-cd changer
Également pour Pioneer PDR-W739 : Manuel de démarrage rapide (2 pages), Manuel de démarrage rapide (2 pages)

Imprimer la page

›

SKIP

SKIP SET

COMPACT DISC RECORDER/

MULTI-CD CHANGER

REMOTE CONTROL UNIT

Marking recorded tracks to skip

Although you can't erase tracks on a CD-R disc, you can set what

are called 'skip IDs'. These tell a CD player (though many do not

recognize skip IDs) not to play a particular track, but to skip to the

next one on the disc.

You can also set skip IDs on CD-RWs, although it's probably a less

useful feature since you can always erase the last track.

Once a skip ID is set, you can clear it, but be careful: you can set up

to 21 skip IDs per disc, but repeatedly setting and clearing skip IDs

in different recording sessions will reduce this number.

Setting skip IDs:

With the recorder stopped, press

SKIP.

The display indicates that you're in skip set/clear mode and

playback starts.

TRK

DISC

ALL

FADER

–dB

Use the 4 and ¢ buttons to

select the track you want to skip.

The

indicator lights if the track playing is already

SKIP

marked with a skip ID.

Press SKIP SET.

The

indicator starts to blink.

SKIP

TRK

DISC

ALL

FADER

–dB

COMPACT DISC RECORDER / MULTI-CD CHANGER

- COMPACT DISC MULTI CHANGER

MIN

SEC

CD-R

ANA

OVER

CD-R

SKIP

ANA

OVER

6 Finalizing and Erasing

◊ÛB¿ˆ≥≤/

• If the track you selected in step 2 above already had a skip

ID set, playback jumps to the next track that doesn't have a

skip ID set.

• Use the 4 and ¢ buttons if you want to change the

track again here.

• If there's no room left on the disc to record another skip ID,

the display will show the message

Press SKIP SET again to set the skip

ID for the track playing.

The

indicator lights in the display once a skip ID has

SKIP

been set.

• To cancel, press 7.

Set further skip IDs by repeating

steps 2 to 4.

When you're finished, press 7 to stop

the disc and press 0 (CD-R side).

Until you eject the disc, the recorder stores the skip ID

information in its memory. On pressing 0, the recorder

writes the skip ID information onto the disc.

Be careful: don't switch off the unit before ejecting the

disc—you'll lose this sessions skip ID changes!

OPEN/CLOSE

COMPACT DISC DIGITAL RECORDER

REC/

REC MUTE

CD-R CONTROL

¡ ¢

4 1

SKIP FULL