Pioneer PDR-W739 Manuel d'utilisation - Page 9
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Pioneer PDR-W739. Pioneer PDR-W739 44 pages. Compact disc recorder / multi-cd changer
Également pour Pioneer PDR-W739 : Manuel de démarrage rapide (2 pages), Manuel de démarrage rapide (2 pages)
Imprimer la page
Rear panel
Important: Before making or changing any rear panel
connections, make sure that all the components are switched off
and unplugged from the power supply.
Connect to the OPTICAL OUT
or COAXIAL OUT of a CD,
MiniDisc, DAT or other digital
equipment for digital recording.
OPTICAL
DIGITAL
IN
COAXIAL
REC
COAXIAL
DIGITAL
OUT
OPTICAL
Connect to the OPTICAL IN or
COAXIAL IN of a CD-R,
MiniDisc or DAT recorder, or
other digital recording device to
be able to record from this unit.
Connecting optical cords
Before plugging in an optical cord, pull
out the protective cover from the
O P T IC A L
optical jack.
Optical interconnects only plug in one
way, so make sure the plug is correctly
lined up with the jack before inserting.
You should hear it click into position
when fully inserted.
Avoid using optical interconnects
longer than 3 meters. Optical
interconnects are available from any
good audio dealer.
Connecting coaxial cords
Use a regular interconnect with a pin-
type (also called RCA or phono) plug
C O A X IA
L
on each end to connect components
with digital coaxial-type jacks. These
are available from any good audio
dealer. Make sure that the plug is
pushed fully home.
Connect to the TAPE/MD/
CD-R LINE IN/OUT jacks
of your amplifier or receiver.
LINE
CONTROL
PLAY
IN
OUT
L
IN
R
Connect to the CONTROL
OUT of a Pioneer amplifer or
receiver to be able to use the
amp/receiver's remote control
with this unit.
After completing all other
connections, connect the
power cord and plug into a
standard AC wall outlet.
Connecting stereo audio cords
The two sets of stereo audio cords
supplied connect this unit to your
amplifier/receiver's analog line
L I N E
inputs/outputs. Be sure to fully insert
each plug for the best connection.
The plugs and jacks are color-coded
to make connection easier.
Connecting the control cord
Use a stereo miniplug cord (not
supplied) to connect the
OUT
receiver to the
unit. If you plan to use this feature,
you must also connect the analog
audio
Plugging in
After double-checking all the connections, connect the power cord
to this unit and plug the other end into a standard wall outlet.
Congratulations! You're done setting up.
2 Connecting Up
AC IN
CONTROL
of your Pioneer amplifier or
of this
CONTROL IN
/
s.
LINE IN
OUT
9