Pioneer X-CM42BTD-k/-w Manuel d'utilisation - Page 35

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Pioneer X-CM42BTD-k/-w. Pioneer X-CM42BTD-k/-w 44 pages. Cd reveiver system

Imprimer la page

Additional information

When a USB storage device is connected

Problem

USB storage device is not

recognized.

File cannot be played.

Folder or file names are not

displayed or are not properly

displayed.

Folder or file names are not

displayed in alphabetical

order.

Much time is required to

recognize the USB storage

device.

Power is not supplied to the

USB storage device.

When an iPod/iPhone/iPad is connected

Problem

Can't operate the iPod/iPhone/iPad by the remote control.

Can't operate the iPod/iPhone/iPad.

Check

Is the USB storage device properly

connected?

Is the USB storage device connected

via a USB hub?

This is not a problem with this unit.

Is the file copyright-protected (by

DRM)?

This is not a problem with this unit.

Do the folder of file names contain

more than 30 characters?

This is not a problem with this unit.

What is the USB storage devices

capacity?

Is "AUTH ERR" displayed on the front

panel display? No power is supplied if

the power consumption is too high.

Remedy

Connect the device securely (all the way in).

This unit does not support USB hubs. Connect the USB storage

device directly.

This unit only supports USB mass storage class devices.

This unit supports portable flash memory and digital audio

playback devices.

Only the FAT16 and FAT32 file systems are supported. Other file

systems (exFAT, NTFS, HFS etc.) are not supported.

This device does not support the use of external hard disc drives.

Turn the power off then back on.

Some USB storage devices may not be recognized properly.

Files stored on a computer cannot be played.

It may not be possible to play some files.

The maximum number of characters displayable for the folder and

file names is 30.

The order of the folder and file names displayed depends on the

order in which the folders or files were recorded on the USB

storage device.

Some time may be required to load the data when large capacity

USB storage devices are connected (this could take several

minutes).

Turn the power off then back on.

Turn the power off, then disconnect and reconnect the USB storage

device.

Press INPUT to switch to the other mode, then switch again to the

USB mode.

Remedy

Make sure the iPod/iPhone/iPad is connected correctly (page 17).

If the iPod/iPhone/iPad is experiencing a hangup, try resetting the

iPod/iPhone/iPad, and reconnect it to the unit.