Pioneer BDP-LX70A Instructions pour la mise à jour du micrologiciel du système - Page 2
Parcourez en ligne ou téléchargez le pdf Instructions pour la mise à jour du micrologiciel du système pour {nom_de_la_catégorie} Pioneer BDP-LX70A. Pioneer BDP-LX70A 5 pages. System firmware update instructions for bdp-lx70a
Également pour Pioneer BDP-LX70A : Catalogue (20 pages), Instructions de mise à jour (5 pages)
Imprimer la page
REMARKS:
1. Supported OS: Windows: 98, 98SE, Me, 2000, XP, Vista, MacOS. No other OS is supported.
2. Certain conditions or PC settings may prevent you from being able to correctly create the
update disc.
3. For information about burning or adding files to a CD-R/-RW, refer to the instruction manual
for your disc creation software, or ask the manufacturer of the disc creation software or
manufacturer of the PC for further assistance.
PROCEDURE:
1. Place a CD-R or CD-RW disc in the drive.
2. Double click the ZIP file named "BDP18A_V381.zip" to open it.
3. Double click the zipped ISO file named "BDP18A_V381.iso".
The CD creation writing software on your computer should automatically open. After the
software opens, it should already be set to burn an image file. If not, please make this the
setting in your software. If your software does not open automatically, then please go to
step 4, otherwise skip to step 5.
4. If your software does not open automatically, then extract and save the zipped file named
"BDP18A_V381.iso" to a folder on your computer. Open your creation writing software,
and set it to burn an image file.
5. Make sure the ISO file "BDP18A_V381.iso" is selected as the source file then copy/burn
the file to the disc.
D. After the disc is completed, confirm the following 4 files are on the disc:
NOTE:
If the correct files are not copied to the disc, your player will not recognize it as an update
disc and you will not be able to carry out the update.
BRANDED
P0001.BIN
P0002.BIN
P0003.BIN
Confirm the file sizes of all 4 files.
You can check the file sizes by selecting a file then pressing the right mouse button and choosing
"Properties". If the file names and sizes do not match the ones listed above, then perform steps B
and C again using a new blank disc.
All manuals and user guides at all-guides.com
29 bytes
128 bytes
51.8 MB (54,363,984 bytes)
128 bytes