Pioneer DV-300-S Manuel d'utilisation - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Pioneer DV-300-S. Pioneer DV-300-S 43 pages. dvd player

Imprimer la page
Pioneer DV-300-S Manuel d'utilisation
02
Connections
• If you connect a TV that is not compatible
with a progressive scan signal and switch
the player to progressive, you will not be
able to see any picture at all. In this case,
switch everything off and reconnect using
the supplied video cable (see Easy
connections on page 10), then switch back
to Interlace (see below).
Switching the video output to interlace
using the front panel controls
Switch the player to standby then, using the
front panel controls, press  STANDBY/ON
while pressing  to switch the player back to
Interlace.
STANDBY/ON
MIC1
STANDBY/
ON
DV-500K

Connecting to an AV receiver

To enjoy multichannel surround sound you
need to connect this player to an AV receiver
using the digital audio output. This player has
both coaxial and optical digital jacks; use
whichever is convenient.
In addition to a digital connection, we
recommend also connecting using the stereo
analog connection.
You'll probably also want to connect a video
output to your AV receiver. You can use any of
the video outputs available on this player (the
illustration shows a standard (composite)
connection).
1
Connect one of the DIGITAL AUDIO
OUT jacks on this player to a digital input
on your AV receiver.
This enables you to listen to multichannel
surround sound.
For an optical connection, use an optical cable
(not supplied) to connect the OPTICAL
DIGITAL AUDIO OUT jack to an optical input
on your AV receiver.
12
En
MIC2
VOLUME
ECHO
MIN – MAX
MIN – MAX
For a coaxial connection, use a coaxial cable
(similar to the supplied video cable) to connect
the COAXIAL DIGITAL AUDIO OUT jack to a
coaxial input on your AV receiver.
AV receiver
VIDEO OUT
P
B
P
OPTICAL COAXIAL
S-VIDEO
R
DIGITAL AUDIO OUT
OUT
COMPONENT VIDEO OUT
2
Connect the analog AUDIO OUT L/R
and VIDEO OUT jacks on this player to a set
of analog audio/video inputs on your AV
receiver
AV receiver
VIDEO OUT
AUDIO OUT
P
B
OPTICAL COAXIAL
P
Y
R
S-VIDEO
DIGITAL AUDIO OUT
COMPONENT VIDEO OUT
OUT
You can use the S-video or component video
jacks to connect to the AV receiver if you
prefer.
Tip
To use the karaoke function you must have this
player connected to your amplifier using the
analog outputs.
To coaxial/optical
AUDIO OUT
L
R
Y
To audio/video inputs
L
R