Ariston RNS7021HK Manuel de l'utilisateur - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Ariston RNS7021HK. Ariston RNS7021HK 20 pages.
Imprimer la page
WASH CYCLES
Follow the instructions on the symbols of the garment's wash
care label. The value indicated in the symbol is the maximum
recommended temperature for washing the garment.
Anti-Stain Power 20°C
This wash cycle ensures maximum stain removal capacity without having
to pre-treat garments; it runs at low temperature and preserves fabrics
and colours.
Anti-Stain Turbo 45'
This cycle ensures excellent stain removal capacity even at 20°C in just 45
minutes. The temperature of this cycle can be increased up to 40°C.
Cotton
Suitable for washing towels, underwear, table cloths, etc. made of
resistant linen and cotton that are moderately to heavily soiled.
Synthetics
Suitable for washing moderately soiled garments made of synthetic bres
(e.g. polyester, polyacrylic, viscose, etc.) or mixed synthetic-cotton bres.
Fast 30'
For washing lightly soiled garments in a short time. Not suitable for wool,
silk and garments to be washed by hand.
Darks
For washing dark-coloured garments. The wash cycle is designed to
preserve dark colours over time.
We recommend using a liquid detergent for best results, preferably when
washing dark-coloured garments.
Ultradelicates
For washing very delicate
garments. It is advisable to turn the garments
inside out before washing them. For best results, use liquid detergent on
delicate garments.
Wool - Woolmark Apparel Care - Green:
The "Wool" wash cycle is approved by the Woolmark
Company for washing wool garments classi ed as
"hand-washable", provided that the wash complies with
the instructions appearing on the garment's label and
with those provided by the manufacturer of this washing
machine. (M1253)
Eco Cotton
Suitable for washing moderately soiled cotton garments. At 40°C and
60°C it is
the standard cycle for washing cotton garments, and is the most
cient in terms of combined water and electricity consumption.
Baby
Use the special wash cycle 10 to remove the soiling typically caused by
babies, while removing all traces of detergent from nappies in order
The cycle has been designed to reduce the amount of bacteria by
disinfecting additives added to the detergent.
Anti-Allergy
Suitable for removing major allergens such as pollen, mites and cat or
dog hair.
Bed & Bath
For washing home linen in a single cycle. It optimises the use of fabric
softener and allows for saving time and electricity. We recommend the
use of powder detergent.
Silk
For washing all silk garments. We recommend the use of special
detergent which has been designed to wash delicate clothes.
Curtains
It is advisable to fold the curtains and place them in a pillow case or mesh
bag.
Padded Jackets
To wash padded jackets, cushions or clothes padded with goose down
(the weight of which should not exceed 1.5 kg), use the special wash
cycle 14.
Rinse
Designed for rinsing and spinning.
Spin + Pump out
Designed for spinning and draining the water.
DISPLAY
The display is useful when programming the washing machine and
provides plenty of information.
A
reactions.
B
C
Section A displays the duration of the various available wash cycles and,
once the cycle starts, the time remaining to the latter's end (the display
will show the maximum duration of the selected cycle which may
decrease after a few minutes, as the actual duration varies in relation to
the laundry load and the chosen settings); if the DELAY START function
was set, the display will show the time remaining to the start of the
selected wash cycle.
Pressing the corresponding button allows for viewing the maximum spin
speed and temperature values attained by the machine during the set
wash cycle, or the most recently selected values, if these are compatible
with the chosen wash cycle.
The "washing phases" relative to the selected cycle and the "washing
phase" of the running cycle appear in section B:
Wash
Rinse
Spin
Pump out
Section C displays – starting from the left – the icons corresponding to
"temperature", "spin" and "delay start".
The "temperature" bars
indicate the maximum temperature level
that can be selected for the chosen cycle.
The "spin" bars
indicate the maximum spin speed that can be
selected for the chosen cycle.
When lit, the "delay" symbol
indicates that the chosen "Delay start"
value appears on the display.
Locked door indicator
When lit, the symbol indicates that the door is locked. To prevent any
To open the door while a cycle is in progress, press the START/PAUSE
button
; if the
time, run a wash cycle with detergent and no laundry, by setting the
"Auto-Clean" cycle.
DAILY USE
Prepare the laundry by following the suggestions appearing under the
"TIPS AND SUGGESTIONS" section.
- Press the ON/OFF button
; the indicator light relative to START/PAUSE
will ash slowly in green.
- Open the door. Load the laundry while making sure not to exceed the
maximum load quantity indicated in the "WASH CYCLE TABLE".
- Pull out the detergent dispenser drawer and pour the detergent into the
relevant compartments, as described in the "DETERGENT DISPENSER
DRAWER" section.
- Close the door.
- The machine automatically displays the maximum temperature and spin
speed values for the selected cycle, or the most recently used settings if
they are compatible with the selected cycle. Pressing the button
gradually reduces the temperature down to the cold wash ("OFF" setting).
Pressing the
button gradually reduces the spin speed until it is
completely excluded ("OFF" setting). Pressing the buttons further restores
the maximum allowed values for the selected cycle.
- Select the desired wash cycle.
- Select the desired options.
- Press the START/PAUSE
button to start the wash cycle; the relative
indicator light will light up steady in green and the door will lock (
symbol on).
PAUSING A CYCLE
To pause the wash cycle, press the START/PAUSE
which it was interrupted, press the START/PAUSE
OPENING THE DOOR, IF NECESSARY
Once a cycle starts, the
symbol turns on to signal that the door cannot
be opened. While a wash cycle is running, the door remains locked. To
open the door while a cycle is under way, for example, to add or remove
garments, press the START/PAUSE
opened. Press the START/PAUSE
CHANGING A RUNNING WASH CYCLE
To change a wash cycle while it is in progress, pause the washing machine
using the START/PAUSE
amber), then select the desired cycle and press the START/PAUSE
button again.
! To cancel a cycle that has already begun, press and hold the ON/OFF
AT THE END OF THE WASH CYCLE
This will be indicated by the word "END" on the display; when the
half of an hour.
button again; the
button again.
button to pause the cycle; the
symbol is not lit, the door may be
button again to continue the cycle.
5