Pioneer DVD-V7200 Manuel du réseau - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel du réseau pour {nom_de_la_catégorie} Pioneer DVD-V7200. Pioneer DVD-V7200 24 pages. Industrial dvd-video player
Également pour Pioneer DVD-V7200 : Manuel d'utilisation (46 pages), Informations sur la mise à niveau (1 pages), Liste des commandes (3 pages), Manuel du logiciel (1 pages), Bulletin d'information (1 pages), Spécifications (3 pages)

SERIAL CONTROL

3.1

3.2

The DVD-V7200 communicates to the computer through the player's RS-

232C port using pins 2 and 3 for communication and Pin 1 for grounding.

Control or "handshaking" lines other than the TxD and RxD connections are

not required. Please refer to the diagram below for clarification.

In some computer, the CTS port should be set to HIGH during the

communication. It is best to connect the computer's CTS connector to the

player's DTR connector. During normal operation, the DTR in the player is

set to HIGH thus the unit is able to receive a command at any time.

The signal interface is an RS-232C connection

Data Length: 8 bit

Stop Bit: 1 bit

Parity bit: No Parity

The data transfer speed can be set to either 4800 or 9600 baud on

the Industrial player menu screen and/or with the Advanced Feature

Menu Set command. (Please refer to the DVD-V7200 Operating

Instructions and/or the Advanced Feature Menu Set command

description.)

NOTE: The factory default is 4800 baud. The player memorizes the

transfer speed each time the player is powered down. The player

retains the setting after the power cycle reaches completion.

Computer

TxD

RxD

GND

DVD-V7200 Upload/Download

DVD-V7200

Pin 2 - RxD

Pin 3 - TxD

Pin 1 - GND

- 4 -