Pioneer DVL-909 Manuel d'entretien - Page 11
Parcourez en ligne ou téléchargez le pdf Manuel d'entretien pour {nom_de_la_catégorie} Pioneer DVL-909. Pioneer DVL-909 47 pages. Dvd player/dvd ld player
Également pour Pioneer DVL-909 : Manuel (2 pages)
2.1.3 Analog Video Signal Processing Block
The video signals output from the built-in 10-bit DA converter of
the M65677FP pass through a low-pass filter and amplifier, and are
output from the DVD MAIN Assy and sent to the VOUT Assy.
In the VOUT Assy, analog noise-reduction processing having three
levels (OFF, low, and high) is initially applied only to the Y signal.
This analog noise reduction is the same as that performed by
conventional laser-disc players. The register port output in serial
communication that the PD0259A receives from the system-control
computer is used as the control signal for analog noise reduction.
After analog noise reduction, a CVBS signal is generated by
composing the Y and C signals (no clamping is performed for the C
signal). The timing pulse BF to be used for pedestal clamping is
supplied from the PD0259A. This signal is adjusted within the
PD0259A so that it provides the timing for the burst portions of the
output video signals.
4M DRAM
2
V DATA
H
IC801
MB86371
PD0259A
V
(AV1)
FLD
CLK
-COM
-COM
V DATA
H
IC901
IC951
M65677FP
V
(DNR)
NTSC
ENCODER
CLK
IC952
M65677FP
NTSC
ENCODER
DV-505, DVL-909, DV-S9
Amp.
Cb
LPF
Amp.
Cr
LPF
Amp.
Y
LPF
Amp.
C
LPF
DVD MAIN ASSY
CLAMP
CLAMP
CLAMP
Analog
CLAMP
NR
CLAMP
V OUT ASSY
Cb
Cr
Y
Y
C
CVBS
11