Pioneer HTP-GS1 Manuel d'utilisation - Page 26
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Pioneer HTP-GS1. Pioneer HTP-GS1 35 pages. 5.1ch surround system
Imprimer la page
08
Other connections
Chapter 8
Other connections
Important
• When connecting this system or changing
connections, be sure to switch power off and
disconnect the power cord from the wall socket.
After completing all connections, connect the power
cord to the wall socket.
Connecting auxiliary components
The receiver subwoofer has optical and coaxial digital
inputs for digital playback components, such as DVD, CD
and MD players.
SYSTEM CONNECTOR
USE ONLY WITH
DISPLAY UNIT
AC IN
DVD player, etc.
•
Connect the digital output jack on your DVD
player, etc. to one of the DIGITAL input jacks on the
receiver subwoofer.
Use a commercially available coaxial or optical cable to
make this connection.
Connecting an analog audio component
You can use the ANALOG input jacks to connect an
analog audio component, such as a tape player. See
Using this system for TV audio on page 12 for connection
details (this explains connecting the audio output from
your TV, but any analog audio component can be
connected).
26
En
ANTENNA
CONTROL IN
MCACC
SETUP MIC
FM
AM
UNBAL
75Ω
LOOP ANTENNA
AUDIO INPUT
DIGITAL
CONTROL
SPEAKERS
DVD/DVR
XBOX 360
DIGITAL
ANALOG
OUT
SUB WOOFER
R
SURROUND
L
(COAXIAL)
(OPTICAL)
(OPTICAL)
L
R
R
L
CENTER
FRONT
DIGITAL OUT
(COAXIAL)
DIGITAL OUT
(OPTICAL)
Listening to an external audio source
You can connect both analog and digital external audio
sources to this system. Digital audio sources include
digital satellite receivers, CD recorders, etc. Analog
sources include your TV. See also Using this system for
TV audio on page 12 and Connecting auxiliary
components above.
1
If the system isn't already on, press
switch on.
Also make sure that the external source (TV, satellite
receiver, etc.) is switched on.
2
Select DVD/DVR, DIGITAL or ANALOG to select the
source for playback.
These buttons correspond with the input jacks on the
receiver subwoofer.
or
3
If necessary, start playback of the external source.
Connecting external antennas
For an external AM antenna, use 5 m to 6 m of vinyl-
insulated wire and set up either indoors or outdoors.
Leave the loop antenna connected.
Indoor
antenna
(vinyl-coated
wire)
For an external FM antenna, Use a PAL connector to hook
up an external FM antenna.
AUDIO INPUT
XBOX 360
DVD/DVR
DIGITAL
ANALOG
+
+
SET UP
/TUNE
SR
1
2
3
RECEIVER to
Outdoor antenna
AM
LOOP ANTENNA
5 m to 6 m
PAL connector