Pioneer MLXTW Manuel d'entretien - Page 19

Parcourez en ligne ou téléchargez le pdf Manuel d'entretien pour {nom_de_la_catégorie} Pioneer MLXTW. Pioneer MLXTW 36 pages.

Imprimer la page

7. GENERAL INFORMATION

7.1 DISASSEMBLY

Removing the Amplifier Assy

1 ) The Amplifier Assy is attached to the cabinet by 4 external

screw 1. To detach it, pull down the subwoofer toward the

left side. Then unfasten those screws 1 (× 4)

2 ) Stand up the speaker again. After unfastening the rear panel

screw 2 (× 8), pull straight the Amplifier Assy toward back

about 13cm. Then remove the connecting cord of SW. Assy

and LED Assy. Next, pull out the Amplifier Assy and remove

the speaker cords.

LINE LEVEL

SPEAKER LEVEL

INPUT

OUTPUT

INPUT

Rear Panel

Bind the Power SW lead

and LED lead by the binder.

Be sure to fix the lead between CNTL-ASSY and

POWER ASSY to the chassis by the binder.

Be sure to bind the secondary side lead

of the transformer by the binder.

3 ) The SW. Assy and LED ASSY is attached to the front panel by

each 2 screws. To detach them, remove the Amplifier Assy

first. Then unfasten each screws from the cabinet back side.

Screw1

Removing the Subwoofer

1 ) The speaker element is attached to the back board by 4 external

screws 3 and washers. To detach it, unfasten those screws and

washers.

2 ) When attaching the speaker, face its terminal downward.

(Screws must be used with washers.)

Amplifier Assy

Removing the Front Panel

The front panel is attached to the baffle by press-fitting.

To detach it, pry it open by inserting a flat blade screwdriver

into lower side.

Be sure to bind the POWER SW

lead and LED lead by the cable

holder(twist-lock).

Bind the SP lead by the

binder.

200

LINE LEVEL

SPEAKER LEVEL

INPUT

OUTPUT

INPUT

S-W80S

LED ASSY

SW. ASSY