Pioneer PDP-S55-LR Manuel d'utilisation - Page 10
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Pioneer PDP-S55-LR. Pioneer PDP-S55-LR 41 pages. Pioneer speaker system operating instructions
Également pour Pioneer PDP-S55-LR : Manuel d'entretien (3 pages)
Imprimer la page
English
Connecting speaker cords
Note:
Be sure to turn off the power to the monitor before connecting
the speakers.
Use the provided speaker cords to connect the
R/L speaker jacks of the monitor to the speaker
jacks of the speakers.
Once the cords have been connected, pull on the cords
lightly to make sure that they have been connected firmly to
the speaker jacks. An improper connection might result in
the sound being interrupted or the appearance of noise in
the output sound.
Cord clampers
Remove the seal from the rear of the cord
clampers, attach the clampers in the desired
position, and clamp the cords into place.
Note that the speaker cords have positive and
negative ends, and that you should be sure to insert
them correctly.
Press the button of the speaker jack and keep it pressed down
as you insert the wire of the speaker cord and then release the
button.
10
Black
Red
Cleaning cabinets
Note:
Before cleaning, always be sure to remove the power plug
from its socket.
¶ Wipe with a soft, dry cloth with a relatively flat pile.
If soiling is particularly bad, wet the cloth in a mixture of
neutral detergent thinned with water, wring the cloth dry,
wipe, and then finish with a dry cloth.
If using a chemically treated cleaning cloth, be sure to
follow any and all instructions on its use.
¶ Wiping with a mixture containing benzene, paint thinner,
or other volatile materials may result in warping or the
peeling of the cabinet coating.
¶ To remove dust from the speaker mesh protectors, use a
vacuum cleaner with a brush adapter.
Note that you should never attempt to clean the
speakers by applying a vacuum directly to the speaker
mesh protectors or by using nozzle adaptor.
¶ Scratching the cabinet or the speaker mesh protectors
with a fingernail or the application of force using any
other hard object may result in scratching.
Also note that inserting any sharp object into the speaker
mesh protectors may result in the opening of holes.
Note:
Never apply insecticide or any other volatile materials on the
cabinet. Also avoid leaving any rubber or plastic materials on
the cabinet for any extended period of time, as doing so may
result in warping or the peeling of the cabinet coating.
Specifications
Description ................................... 2-way, 3-speaker system
(Bass reflex speaker system; Qty: 1)
Impedance ...................................................................... 6 Ω
Rated input .................................................................. 20 W
Maximum input ............................................................ 60 W
External dimensions
.............................. 90 mm (W) x 880 mm (H) x 96 mm (D)
3-17/32 in. (W) x 34-21/32 in. (H) x 3-25/32 in. (D)
(Not including attachment plates; Qty: 1)
Weight ...................................... 6.8 kg (15 lbs) (2 speakers)
Usage environment
Temperature ...................... 0 °C to 40 °C (32 °F to 104 °F)
Humidity ...................................................... 20 % to 80 %
Storage environment
Temperature .................. –10 °C to 50 °C (14 °F to 122 °F)
Humidity ...................................................... 10 % to 90 %
¶ Specifications and design subject to possible
modification without notice, due to improvements.