Pioneer PDP-4214HD Manuel d'utilisation - Page 17

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Pioneer PDP-4214HD. Pioneer PDP-4214HD 47 pages. Pioneer 3rd, 4th % 5th generations plasma panel quick reference parts lists
Également pour Pioneer PDP-4214HD : Listes de référence rapide des pièces (12 pages)

Imprimer la page

Preparation

Cautions regarding the remote control unit

• Do not expose the remote control unit to shock, liquid, or

high humidity.

• Do not place the remote control unit under direct sunlight;

the unit may deform.

• The remote control unit may not work properly if the remote

sensor window of the Plasma Display is under direct sunlight

or strong lighting. In such case, change the angle of the

lighting or Plasma Display, or operate the remote control unit

closer to the remote sensor window.

• When any obstacle exists between the remote control unit

and the remote control sensor, the remote control unit may

not function.

• As the batteries become empty, the remote control unit can

function within a shorter distance from the remote control

sensor. Replace the batteries with new ones if necessary.

• The Plasma Display emits very weak infrared rays from its

screen. If you place such equipment operated through

infrared remote control as a VCR nearby, that equipment may

not receive commands from its remote control unit properly

or entirely. If this is the case, place that equipment at a

location far enough from the Plasma Display.

• Depending on the installation environment, infrared rays

from the Plasma Display may not allow this system to

properly receive commands from the remote control unit or

may shorten allowable distances between the remote control

unit and the remote control sensor. The strength of infrared

rays emitted from the screen differs, depending on images

displayed on the screen.

06-PDP42A3HD-Eng (15-18)

Cable connections for watching digital

and/or conventional TV channels

This system is equipped with two terminals for inputting TV

broadcasting signals: ANTENNA/CABLE IN and DTV-ANTENNA

IN. The ANTENNA/CABLE IN terminal accepts conventional TV

broadcasting signals. The DTV-ANTENNA IN terminal accepts

digital TV broadcasting signals. When using a cable TV to

watch conventional TV channels, connect to the ANTENNA/

CABLE IN terminal as shown.

Connecting to an Aerial

To view TV channels correctly, the Plasma Display must receive

a signal.

Connecting the aerial of digital TV

When you connect the aerial of digital TV, connect the outdoor

aerial.

DTV-

ANTENNA IN

Connecting the aerial of analog TV

There are three ways to connect the aerial or network input

cable for analog TV.

It is recommended to connect the outdoor aerial for the best

outcome of the images.

ANTENNA

/ CABLE IN

05.4.20, 4:30 PM

Cable TV

Cable

Converter