Ariston L 63 B-S-W Manuel de l'utilisateur - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Ariston L 63 B-S-W. Ariston L 63 B-S-W 37 pages. Ariston l 63 b na: user guide
Également pour Ariston L 63 B-S-W : Manuel d'entretien et d'utilisation (36 pages)
Imprimer la page
Ready, steady, go!
You have loaded your dishes and you now have to set
the wash cycle. It takes just one minute to learn how
After performing all the
operations described in the
previous paragraphs press
on-off button "A": indicator
light "B" comes on.
Selecting the wash cycle.
To select the wash cycle,
turn knob "D" clockwise until
the reference notch on the
knob corresponds with the
number or symbol for the
cycle you wish to set (have
a look at the wash cycle table
on page 7).
After a few seconds, you will
hear a short beep: the wash
cycle has begun and we do
not recommend you change
it.
The dishwasher keeps you
informed.
Your dishwasher is fitted with
indicator lights (G) which
light up to indicate the cycle
phase under way.
p r e w a s h , w a s h , r i n s i n g ,
drying.
At all times, your dishwasher
tells you which cycle phase
is under way.
Modifying a wash cycle in
progress.
If you have chosen the wrong
cycle, not to worry! You can
modify the wash cycle in
progress, if it has only just
started. Turn the knob
counter clockwise until it
reaches the Reset position
and, after a few seconds, you
will hear 4 beeps and
indicator light "G" will turn off.
This is to inform you that all
the settings have been
cancelled. You are now free
to re-set the correct wash
cycle.
You can cancel the
wash cycle in progress,
if it has only just started.
www.aristonappliances.us
Starting the dishwasher
You've left out a dish?
Well,
it
happens
everyone.Interrupt the wash
cycle by pressing the ON-
OFF button, insert the dish
you had forgotten and press
the ON-OFF button again.
The cycle will start up from
where you interrupted it.
Finished?
The end of the wash cycle is
indicated by two short beeps
and the flashing of the drying
phase indicator light.
Warning:
Turn the knob counter
clockwise to Reset in order
to
reset
all
the
settings.Press the ON-
OFF button as well, thus
cutting off the electricity
supply to the appliance.,
unplug the appliance from
the electricity socket to cut
off the power supply; the
power supply cable should
consequently be easily
accessible.
If accessible turn off the
water tap.
Wait a few minutes before
unloading the dishes: they
are very hot! If you wait a little
while, they dry better thanks
to the steam.
Empty the lower rack
first.
If opening the
door soon after
the end of the
program, or
during it, stand
away from the Dishwasher,
to avoid possible injury
from hot steam.
to
There's been a power
failure? Have you opened
the dishwasher door?
The wash cycle stops and
then restarts when the
electricity comes back on or
when you shut the door.
Everything is under control!
ARISTON DISHWASHER - User Manual 5
Make sure the wash
cycle has ended before
removing the dishes!