Ariston LFC2C19 Manuel de référence quotidien - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel de référence quotidien pour {nom_de_la_catégorie} Ariston LFC2C19. Ariston LFC2C19 9 pages.
Également pour Ariston LFC2C19 : Manuel de référence quotidien (9 pages)
Imprimer la page
OPTIONS AND FUNCTIONS
OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL).
If an option is not compatible with the selected program see PROGRAMS TABLE, the corresponding LED flashes rapidly 3 times and beeps
will sound. The option will not be enabled.
HALF LOAD
If there are not many dishes to be washed, a half load
cycle may be used in order to save water, electricity and
detergent. Select the program and press the HALF LOAD
button: the indicator light will light up. Press the HALF
LOAD button to deselect this option.
Remember to halve the amount of detergent.
DELAY
It is possible to delay the start time of the program by 2, 4
or 8 hours:
1.After selecting the desired program and any other
options, press the DELAY button. The indicator light will
go on.
2.Select the desired delay time by pressing the DELAY
button repeatedly. The 2 hours, 4 hours and 8 hours
indicator lights will go on in succession. If the DELAY
button is pressed again, the option is deselected and the
indicator light goes off.
3.After the selection process, the countdown will begin if
the START/PAUSE button is pressed. The selected delay-
period indicator light flashes and the START/PAUSE
button stops flashing (fixed light).
4. Once this time has elapsed, the DELAY indicator light
goes off and the program begins.
The DELAY function cannot be set once a program has
started.
4
TABLET (Tab)
This setting allows you to optimize the performance of
the program according to the type of detergent used.
Press the TABLET button (the indicator light will light up)
if you use combined detergents in tablet form (rinse aid,
salt and detergent in 1 dose).
If you use powder or liquid detergent, this option
should be off.
DRAIN OUT
To stop and cancel the active cycle, the Drain Out
function can be used.
A long press of START/PAUSE button, will activate the
DRAIN OUT function. The active program will be stopped
and the water in the dishwasher will be drained out.