Ariston LFF 8M132 Manuel d'utilisation - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Ariston LFF 8M132. Ariston LFF 8M132 16 pages.

Imprimer la page

Special wash cycles

and Options

Notes:

Optimum performance levels when using the "Auto 50° and

Express " cycles can be achieved by respecting the specified

number of place settings.

To reduce consumption even further, only run the dishwasher

when it is full.

The Normal wash cycle adheres to the regulation standard

AS/NZS 2007. Although it has a longer duration than other wash

cycles it uses less energy and is less harmful to the environment.

Note for Test Laboratories: for information relating to

comparative Standard AS/NZS testing conditions, please

send an email to the following address: assistenza_en_lvs@

indesitcompany.com

Wash options*

The OPTIONS may only be set, changed or reset after

the wash cycle has been selected and before the Start/

Pause button has been pressed.

Only the options which are compatible with the type of wash

cycle set may be selected. If an option is not compatible

with the selected wash cycle

corresponding symbol flashes rapidly 3 times.

If an option is selected which is not compatible with another

(previously selected) option, it will flash 3 times and switch

off, while the most recently selected option will remain active.

To deselect an option which has been set by mistake, press

the corresponding button again.

Delayed start

It is possible to delay the start time of the cycle for a

period of time between 1 and 24 hours:

1. Select the desired wash cycle and any other options

required, press the DELAYED START button. The relevant

symbol starts flashing. Use the buttons + and - to select when

the wash cycle will start (h01, h02 etc.)

2. Confirm with the START/PAUSE button. The symbol stops

flashing and the countdown begins.

3. Once this time has elapsed, the DELAYED START symbol

switches off and the wash cycle begins.

To deselect the DELAYED START option, press the DELAYED

START button until the text OFF

The Delayed Start function cannot be set once a wash

cycle has been started.

Short Time option

This option can be used to reduce the duration of the

main wash cycles while maintaining the same washing and

drying performance levels.

After selecting the wash cycle, press the Short Time option

button;

To deselect the option, press the same button again.

(see Table of wash cycles)

, the

appears.

Extra drying

To improve the dryness level of the crockery, press

the EXTRA DRYING button and the symbol will light up. If it

is pressed again, the option will be deselected.

A higher temperature during the final rinsing and a longer

drying phase improve the dryness level.

The EXTRA DRYING option increases the duration of

the wash cycle.

Multi-functional tablets (Tabs)

This option optimises washing and drying results.

When using multi-functional tablets, press the MULTI-

FUNCTIONAL TABLETS button; the corresponding symbol

will light up. If the button is pressed again, the option will

be deselected.

The "Multi-functional tablets" option results in a

longer wash cycle.

The use of tablets is only recommended for models

having this option and it is not recommended with wash

cycles which do not specify the use of multi-functional

tablets.

Zone Wash

This option makes it possible to carry out the wash

cycle in the selected rack only. Select the wash cycle and

then press the ZONE WASH button: the selected rack lights

up and the wash cycle starts in the selected rack only. Press

the button again to deselect the option.

The option is available with the following wash cycles:

Intensive and Normal.

Select the option and the Intensive cycle to start the

ULTRAINTENSIVE ZONE washing. This wash cycle is ideal

for very soiled mixed loads, e.g. pans and saucepans,

dishes with heavy encrustation or difficult-to-clean crockery

(grater, vegetable mill, dirty cutlery). The spraying pressure is

stronger and the washing temperature higher, thus ensuring

optimum handling of stubborn stains.

Select the option and the Normal cycle to start the SAVING

ZONE washing. This function makes it possible to reduce

water and energy consumption, thus achieving excellent

washing and drying results. Cycle duration is longer.

Remember to load the crockery in the selected rack only