AEONTEC Smart Switch 6 Manuel - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} AEONTEC Smart Switch 6. AEONTEC Smart Switch 6 9 pages. Low-cost z-wave switch plugin module specifically used to enable z-wave command and control (on/off) of any plug-in too

Imprimer la page

Security or Non-security feature of your Smart

Technical specifications.

Switch in Z-wave network.

Model number: ZW096.

If you want your Smart Switch is a non-security device

Max standby power: 0.5W.

in Z-wave network, you just need to press the Action

USB output: DC 5V±0.3, 1000mA.

Button once on Smart Switch when you use a controller/

Operating temperature: 0 to 45 .

gateway to add/include your Smart Switch.

Relative humidity: 8% to 80%.

In order to take full advantage of all functionality the

Operating distance: Up to 500feet/150metres outdoors.

Smart Switch, you may want your Smart Switch is a

AC input:

security device that uses secure/encrypted message to

Version

Input

communicate in Z-wave network, so a security enabled

230V 50Hz, Max: 10A

controller/gateway is needed and then you need to

220V 60Hz, Max: 10A

press the Smart Switch's Action Button 2 times within 1

second when your security controller/gateway starts the

220V 50Hz, Max: 10A

network inclusion.

230V 50Hz, Max: 13A

230V 50Hz, Max: 10A

230V 50Hz, Max: 6A

Reset your Smart Switch.

230V 50Hz, Max: 13A

If at some stage, your primary controller is missing or

120V 60Hz, Max: 15A

inoperable, you may wish to reset all of your Smart

Switch's settings to their factory defaults. To do this,

press and hold the Action Button for 20 seconds and

Warranty.

then release it. Your Smart Switch will now be reset to

its original settings, and the RGB LED will be solid for 2

Aeon Labs warrants to the original purchaser of Products

seconds and then start slow blinking as a confirmation.

that for the Warranty Period (as defined below), the

Products will be free from material defects in materials

and workmanship. The foregoing warranty is subject to

the proper installation, operation and maintenance of the

Customer must prepay shipping and transportation

Products in accordance with installation instructions and

charges for returned Products, and insure the shipment

the operating manual supplied to Customer. Warranty

or accept the risk of loss or damage during such

claims must be made by Customer in writing within thirty

shipment and transportation. Aeon Labs will ship the

(30) days of the manifestation of a problem. Aeon Labs'

repaired or replacement products to Customer freight

sole obligation under the foregoing warranty is, at Aeon

prepaid.

Labs' option, to repair, replace or correct any such defect

Customer shall indemnify, defend, and hold Aeon

that was present at the time of delivery, or to remove the

Labs and Aeon Labs' affiliates, shareholders,

Products and to refund the purchase price to Customer.

directors, officers, employees, contractors, agents

Working band

The "Warranty Period" begins on the date the Products

and other representatives harmless from all demands,

is delivered and continues for 12 months.

921.42MHz

claims, actions, causes of action, proceedings, suits,

Any repairs under this warranty must be conducted by

921.42MHz

assessments, losses, damages, liabilities, settlements,

an authorized Aeon Labs service representative and

judgments, fines, penalties, interest, costs and expenses

868.42MHz

under Aeon Labs' RMA policy. Any repairs conducted by

(including fees and disbursements of counsel) of

868.42MHz

unauthorized persons shall void this warranty.

every kind (i) based upon personal injury or death or

868.42MHz

Excluded from the warranty are problems due to

injury to property to the extent any of the foregoing

accidents, acts of God, civil or military authority, civil

865.22MHz

is proximately caused either by a defective product

disturbance, war, strikes, fires, other catastrophes,

(including strict liability in tort) or by the negligent or

868.42MHz

misuse, misapplication, storage damage, negligence,

willful acts or omissions of Customer or its officers,

908.42MHz

electrical power problems, or modification to the

employees, subcontractors or agents, and/or (ii) arising

Products or its components.

from or relating to any actual or alleged infringement or

Aeon Labs does not authorize any person or party to

misappropriation of any patent, trademark, mask work,

assume or create for it any other obligation or liability in

connection with the Products except as set forth herein.

of any other intellectual property rights arising from or

Aeon Labs will pass on to Customer all manufacturers'

in connection with the products, except to the extent

Material warranties to the extent that they are

that such infringement exists as a result of Aeon Labs'

transferable, but will not independently warrant any

manufacturing processes.

Material.

I N N O E V E N T S H A L L A E O N L A B S B E L I A B L E F O R

MODIFICATIONS TO THIS EQUIPMENT.SUCH MODIFICATIONS

ANY INDIRECT, INCIDENTAL, PUNITIVE, SPECIAL OR

COULD VOID THE USER'S AUTHORITY TO OPERATE THE

CONSEQUENTIAL DAMAGES, OR DAMAGES FOR LOSS OF

EQUIPMENT.

PROFITS, REVENUE, OR USE INCURRED BY CUSTOMER OR

STORE INDOORS WHEN NOT IN USE. SUITABLE FOR DRY

ANY THIRD PARTY, WHETHER IN AN ACTION IN CONTRACT,

LOCATIONS. DO NOT IMMERSE IN WATER. NOT FOR USE

OR TORT, OR OTHERWISE EVEN IF ADVISED OF THE

WHERE DIRECTLY EXPOSED TO WATER.

POSSIBILITY OF SUCH DAMAGES. AEON LABS' LIABILITY

This device complies with Part 15 of the FCC Rules.

AND CUSTOMER'S EXCLUSIVE REMEDY FOR ANY CAUSE OF

ACTION ARISING IN CONNECTION WITH THIS AGREEMENT

Operation is subject to the following two conditions:

OR THE SALE OR USE OF THE PRODUCTS, WHETHER

This device may not cause harmful interference, and

BASED ON NEGLIGENCE, STRICT LIABILITY, BREACH OF

This device must accept any interference received,

WARRANTY, BREACH OF AGREEMENT, OR EQUITABLE

PRINCIPLES, IS EXPRESSLY LIMITED TO, AT AEON LABS'

including interference that may cause undesired

OPTION, REPLACEMENT OF, OR REPAYMENT OF THE

operation. This equipment has been tested and found

PURCHASE PRICE FOR THAT PORTION OF PRODUCTS

to comply with the limits for a Class B digital device,

WITH RESPECT TO WHICH DAMAGES ARE CLAIMED. ALL

pursuant to part 15 of the FCC Rules. These limits are

CLAIMS OF ANY KIND ARISING IN CONNECTION WITH THIS

designed to provide reasonable protection against

AGREEMENT OR THE SALE OR USE OF PRODUCTS SHALL

BE DEEMED WAIVED UNLESS MADE IN WRITING WITHIN

harmful interference in a residential installation. This

THIRTY (30) DAYS FROM AEON LABS'S DELIVERY, OR THE

equipment generates, uses and can radiate radio

DATE FIXED FOR DELIVERY IN THE EVENT OF NONDELIVERY.

frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

THE INDEMNITY AND WARRANTY IN ABOVE ARE EXCLUSIVE

AND IN LIEU OF ALL OTHER INDEMNITIES OR WARRANTIES,

interference to radio communications. However, there

WHETHER EXPRESS OR IMPLIED, INCLUDING THE IMPLIED

is no guarantee that interference will not occur in a

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A

particular installation. If this equipment does cause

PARTICULAR PURPOSE.

harmful interference to radio or television reception,

which can be determined by turning the equipment

off and on, the user is encouraged to try to correct the

FCC NOTICE (for USA)

interference by one or more of the following measures:

THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY

Reorient or relocate the receiving antenna.

RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED

Increase the separation between the equipment and

receiver.

Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

Consul the dealer or an experienced radio/TV

technician for help.

Warning

Do not dispose of electrical appliances as unsorted

municipal waste, use separate collection facilities.

Contact your local government for information

regarding the collection systems available.

Certifications (regional):

Z-Wave and Z-Wave Plus

are registered trademarks

of Sigma Designs and its

subsidiaries in the United

States and other countries

N29634

FCC ID: XBAFT105

Version:501009600001-AA