Dinel GPLS-25 Series Manuel d'instruction - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Dinel GPLS-25 Series. Dinel GPLS-25 Series 12 pages. Thru-wall level switches
Également pour Dinel GPLS-25 Series : Manuel d'instruction (14 pages)

Imprimer la page

Dinel GPLS-25 Series Manuel d'instruction

NSuiTablE raNgE OF aPPliCaTiON

The sensor also is not intended for level measurement on the gauge-pipe and the

container wall with antistatic treatment (partially electrically conductive).

rOCEdurE FOr PuT SENSOr iNTO OPEraTiON

1. i

NSTallaTiON

a) The sensor type GPLS–25N–0, which is intended to point level

detection on plastic or glass and gauge-tubes.

The sensor is fixed to the gauge

pipe or tube by means of two

plastic straps (2.5 mm width). The

cable should be vertically down-

wards oriented. The maximum wall

thickness of the tube depends on

the detected medium (see technical

data), the maximum is 8 mm.

b) The sensor type GPLS–25N–1, which is intended to thru-wall level

sensing of liquids in plastic or glass vessels with flat walls.

The sensor is installed on a clean

and degreased surface of the ve-

ssel wall. The attachment is done

by doublesides adhesive layer.

Orientation of the sensor can be

arbitrary. Maximum thickness of the

vessel wall depends on the detec-

ted medium (see technical data),

the maximum is 8 mm.

Plastic straps