3Com Etherlink 3C905B-TX Manuel rapide - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel rapide pour {nom_de_la_catégorie} 3Com Etherlink 3C905B-TX. 3Com Etherlink 3C905B-TX 15 pages. Etherlink pci network interface cards
Également pour 3Com Etherlink 3C905B-TX : Manuel rapide (12 pages), Manuel rapide (12 pages)
Imprimer la page
rn_body.SML Page 4 Wednesday, June 9, 1999 7:56 AM
4
E
L
®
PCI N
THER
INK
7 Click Install NIC Driver .
To install the network driver and the 3Com NIC
I
Diagnostics program, click Install with Diagnostic Program.
To install the network driver only, click
I
Install without Diagnostic Program .
Files are copied. A message box appears when the
installation is complete.
8 Click OK .
9 Select your operating system to continue
the installation.
The Completing NIC Installation screen appears.
10 Click Done .
11 Exit the EtherCD , and then shut down Windows.
12 Turn off the power to the PC.
Do not remove the EtherCD from the CD-ROM drive.
The next step is to install the NIC in the PC.
Installing the NIC in the PC
To install the NIC in the PC:
1 Make sure that you have run the preinstallation
program, as described in the previous section.
2 Remove all jewelry from your hands and wrists. Use
only insulated or nonconducting tools.
3 Turn off the power to the PC and unplug the
power cord.
4 Remove the cover from the PC.
5 Locate an empty, nonshared bus-mastering PCI slot
and remove its slot cover. Save the screw.
Do not install the NIC in a shared PCI slot. Avoid any
PCI slot next to an ISA slot. This is often a shared slot
and does not support bus mastering.
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
I
C
Q
G
ETWORK
NTERFACE
ARDS
UICK
UIDE