Aeotec AEOEZWA009 Manuel - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Aeotec AEOEZWA009. Aeotec AEOEZWA009 7 pages.
Imprimer la page
Setting
0 - 255
Parameter 12: High Humidity Trigger BASIC Set Command Value
This defines what BASIC command shall be sent out into association group 4
Size: 1 Byte, Default Value: 0
Setting
0 - 255
Parameter 13: Offset value for Mould danger notification
This value allows to increase the humidity threshold for mould danger notification by max 10%
Size: 1 Byte, Default Value: 0
Setting
0 - 10
Parameter 255: Reset Parameter
This parameter helps reset configuration parameters and the device to factory defaults
Size: 4 Byte, Default Value: 0
Setting
1 – 4294967294
4294967295
Technical Data
Dimensions
Hardware Platform
IP Class
Battery Type
Device Type
Generic Device Class
Specific Device Class
Network Operation
Firmware Version
Z-Wave Version
Z-Wave Product Id
Frequency
Maximum transmission
power
Description
Value
Description
Value
Description
%
Description
Reset all Parameter settings to their default settings.
Completely factory reset sensor and send device reset locally notification.
34x34x16 mm
ZGM130S
IP 20
1 * CR2477
Notification Sensor
GENERIC TYPE SENSOR NOTIFICATION (0x07)
SPECIFIC TYPE NOTIFICATION SENSOR (0x01)
Reporting Sleeping Slave
01.00
07.12
0371.0002.0009
Europe - 868,4 Mhz
5 mW