Aeotec GP-AEOMPSEU Manuel de l'utilisateur - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Aeotec GP-AEOMPSEU. Aeotec GP-AEOMPSEU 4 pages. Multipurpose sensor
Imprimer la page
This section will go over how to display all information in your SmartThings Connect app.
Steps in SmartThings Connect.
1. Open SmartThings Connect
2. Scroll down to your Aeotec Multipurpose Sensor
3. Then tap Aeotec Multipurpose Sensor widget.
4. On this screen, it should display:
•
Open/Close
•
Temperature
You may use Open/Close and Temperature sensor in an Automation to control your Aeotec Smart
Home Hub home automation network.
How to remove Aeotec Multipurpose Sensor from
Aeotec Smart Home Hub
If your Aeotec Multipurpose Sensor is not performing as you expected, you'll likely need to reset
your Multipurpose Sensor and remove it from Aeotec Smart Home Hub to begin a fresh start.
Steps
1. From the Home screen, select Menu
2. Select More Options (3 dot icon)
3. Tap Edit
4. Tap Delete to confirm
Factory reset your Aeotec Multipurpose Sensor
Aeotec Multipurpose Sensor can be factory reset at any time if you come across any issues, or if
you need to re-pair Aeotec Multipurpose Sensor to another hub.
Video link:
https://youtu.be/yT3iVHuO7Qk
Steps in SmartThings Connect.
1. Press and Hold the recessed connect button for five (5) seconds.
2. Release the button when the LED starts blinking red.
3. The LED will blink red and green while attempting to connect.
4. Use the SmartThings app and steps detailed in "Connect the Aeotec Multipurpose Sensor"
above.