Aeotec Recessed Door Sensor 7 Manuel - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Aeotec Recessed Door Sensor 7. Aeotec Recessed Door Sensor 7 11 pages.

Aeotec Recessed Door Sensor 7 Manuel
Security Class
SmartStart Compatible
Over The Air (OTA)
Multi Channel Device
Association
Factory Reset
Power-down Memory
Timed battery report
Low battery warning
Sensor State Report
Control other device
AEOTEC Engineering Specification
Non-Security, S0, S2 Unauthenticated, and S2 Authenticated
Support. After powering on, SmartStart is auto activ ated if it 's out of the Z-Wave network.
Support. Firmware can be updated via RF.
No
Support. Refer to Section 4.7 Association Group Info.
Support. Refer to Section 3.6 How to factory reset.
Support. All command settings will stay unchanged even power down.
Support. Refer to Configuration Parameter 101.
Support. Refer to Configuration Parameter 90.
Support. When Magnet is away or near, send out notification via Group 1 .
Support. When Magnet is away or near, control other Z -Wave device directly via Group 2.
Page 3