Ariston GL 6+ Manuel d'instructions - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions pour {nom_de_la_catégorie} Ariston GL 6+. Ariston GL 6+ 37 pages. Electric mini tank water heaters
Également pour Ariston GL 6+ : Manuel de l'utilisateur (12 pages), Manuel d'installation (14 pages), Manuel de l'utilisateur (12 pages), Manuel de l'utilisateur (14 pages), Remplacement du thermostat (3 pages)

Troubleshooting

Water does

1. Make sure the power supply is on and working.

2. If light does not come on, check that the reset button is pushed in; follow steps from

not get hot

previous section.

3. If the indicator light works properly but temperature does not get hot a tap, test for

a plumbing crossover; shut off cold supply to heater and open hot water tap. There

should be no water flowing. Any continued flow indicates a crossover which will

effect the temperature and will need to be corrected.

4. Call a qualified service technician to test the resistance of the heating element (8-

10 ohms). Heating element should be replaced if readings are outside these

values."

Light not on

1. If the light does not come on, but water gets hot, check for faulty bulb.

2. Check reset button; follow steps from previous section.

Brown water

1. Brown or rusty water indicates a "spent" anode rod. Replace anode rod.

Odor in water

1. Smelly water could be due to an unusual reaction between local water and the

heater's anode rod. Check anode rod (see section on changing the anode rod).

Leaking

1. Check water fittings and T & P fitting on top of tank.

2. Remove front cover and inspect heating element gasket.

3. If tank is leaking call Bosch Water Heating for warranty claim if still within warranty

period.