Ariston BCH 120 L Instructions techniques d'installation et manuel d'utilisation - Page 17
Parcourez en ligne ou téléchargez le pdf Instructions techniques d'installation et manuel d'utilisation pour {nom_de_la_catégorie} Ariston BCH 120 L. Ariston BCH 120 L 29 pages. Heating tank
Imprimer la page
TRANSPORT, STORAGE AND RECYCLING INSTRUCTIONS
• The unit must be transported according to the pictograms on the packaging.
• The unit must be transported and stored in dry conditions and freezing conditions must be avoided.
• EU directive 2002/96/EC requires selective collection and recycling of used electric and electronic
devices.
• The "rubbish bin with a cross" symbol on the device indicates that the product must be disposed of separately
from standard household waste at the end of its useful life, and must be brought to a waste sorting centre for electri-
cal and electronic devices or returned to the seller when a replacement unit is purchased.
• Selective sorting, which allows a unit to be recycled at the end of its useful life and processed in a manner that respects the environment,
helps to avoid potentially harmful e ects on the environment and promotes recycling of the components that make up the product.
• To nd out more about existing waste collection centres, check with your local waste collection service or the store where you purchased
your unit.
• The packaging protects your water heater from damage during transport. We use materials selected for the purposes of environmental
protection.
We request that you return these materials to your nearest recycling or waste collection centre.
• If the unit comes with rechargeable batteries, these must be removed before the unit is discarded, and must be disposed of in a safe way.
These batteries must be removed from their housing, which is accessible under the plastic cover.
GENERAL RECOMMENDATIONS
The instructions are an integral part of the product, and must be provided to the user. Read the warnings with the instructions carefully, as
they contain important information concerning safe installation, use and maintenance.
Keep the instructions safe so they can be referred to at a later date. This appliance is designed to supply and store hot water.
Consequently, it must be attached to a domestic heating installation and to hydraulic piping suitable for its levels of power and performance.
This unit must not be used for any other purpose; the manufacturer is released from all liability if any damage is due to incorrect or unreaso-
nable installation.
Packaging waste must be disposed of in accordance with current standards and as soon as possible where it constitutes a potential danger,
particularly to children.
To clean the exterior of the unit, it is recommended to use a damp cloth and cleaning products intended for this purpose. The use of abrasive
products or solvents is strongly discouraged.
Only a highly quali ed technician is authorised to carry out installation, which must meet current standards, otherwise the product warranty
will become void. A badly installed unit can cause both tangible and intangible damage. In this case, the manufacturer is released from all
liability.
If any accessories are installed on the unit, they must only be original parts from the manufacturer.
Before carrying out any repair and/or maintenance operation on the unit, it is important to isolate all supply sources.
In case of a malfunction in the unit, switch it o and phone technical assistance.
DECLARATION OF CONFORMITY
Conformity of design and production
This product conforms to EU directive 97/23CE, article 3, paragraph 3 concerning pressure equipment and 93/69/CEE relating to the EN12897
standard, speci c to indirectly heated, unvented water heaters.
Electrical conformity Labelling
This product conforms to the following EU directives and standards:
- LVD Directive (electrical safety) 2006/95/CE
EN 60335-1
EN 60335-2-21
EN 50366
- EMC Directive 2004/108/CE
EN 61000-3-2
EN 61000-3
EN 55014-1
- Crossed-out basket 2002/96
Technical Installation Instructions and User Guide
GB
17