Ariston CLAS HE R 18 Manuel de l'utilisateur - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Ariston CLAS HE R 18. Ariston CLAS HE R 18 8 pages. Gas fired condensing wall hung boiler g.c.n : 41-116 - 30 (12 kw) g.c.n : 41-116 - 31 (18 kw) g.c.n : 41-116 - 32 (24 kw)

Imprimer la page

user manual

Dear Customer,

Thank you for choosing an ARISTON boiler.

We guarantee that your boiler is a reliable and technically sound product. This manual provides detailed

instructions and recommendations for the correct use of the appliance.

Remember to keep this manual in a safe place for future reference i.e. by the boiler.

Your local MTS Servicing Centre is at your complete disposal for all requirements.

The installation and first ignition of the boiler

must be performed by qualified personnel in

compliance with current national regulations

regarding installation, and in conformity with

any requirements established by local authorities

and public health organisations.

All CORGI registered installers carry a CORGI

ID card, and have a registration number. Both

should be recorded in the Benchmark Log Book.

You can check your installer is CORGI registered

by calling CORGI directly on:- 0800 915 0485

After the boiler has been installed, the installer

must ensure that the end user receives the

declaration of conformity and the operating

manual, and should provide all necessary

information as to how the boiler and the safety

devices should be handled.

This appliance is designed to produce central heating

for domestic use only.

It should be connected to a heating system and a

distribution network for domestic hot water, both of

which must be compatible with its performance and

power levels.

The use of the appliance for purposes other than

those specified is strictly forbidden. The manufacturer

cannot be held responsible for any damage caused

by improper, incorrect and unreasonable use of

the appliance or by the failure to comply with the

instructions given in this manual.

Installation, maintenance and all other interventions

must be carried out in full conformity with the

governing legal regulations and the instructions

provided by the manufacturer. Incorrect installation

can harm persons, animals and possessions;

the manufacturing company shall not be held

responsible for any damage caused as a result.

In the event of any maintenance or other structural

work in the immediate vicinity of the ducts or flue

gas exhaust devices and their accessories, switch

the appliance off by switching the external bipolar

switch to the "OFF" position and shutting off the gas

valve.

When the work has been completed, ask a qualified

technician to check the efficiency of the ducting and

the devices.

If the boiler should be out of use for a prolonged

period, it is recommended that the electrical power

supply be disconnected and that the external gas

cock be closed. If low temperatures are expected,

the boiler and system pipe work should be drained

in order to prevent frost damage.

Turn the boiler off and turn the external switch "OFF"

to clean the exterior parts of the appliance.

Do not allow children or inexperienced persons to

use the appliance without supervision.

CE labelling

The CE mark guarantees that the appliance conforms

to the following directives:

90/396/CEE

relating to gas appliances

2004/108/CEE

relating to electromagnetic compatibility

92/42/CEE

relating to energy efficiency

2006/95/CEE

relating to electrical safety

The Benchmark Scheme

MTS is a licensed member of the Benchmark Scheme

which aims to improve the standards of installation

and commissioning of domestic heating and hot wa-

ter systems in the UK and to encourage regular servi-

cing to optimise safety, efficiency and performance.

Benchmark is managed and promoted by the Hea-

ting and Hotwater Industry Council. For more infor-

mation visit www.centralheating.co.uk

Please ensure that the installer has fully completed

the Benchmark Checklist on the inside back pages

of the installation instructions supplied with the pro-

duct and that you have signed it to say that you have

received a full and clear explanation of its operation.

The installer is legally required to complete a com-

missioning checklist as a means of complying with

the appropriate Building Regulations (England and

Wales).

All installations must be notified to Local Area Buil-

ding Control either directly or through a Competent

Persons Scheme. A Building Regulations Compliance

Certificate will then be issued to the customer who

should, on receipt, write the Notification Number on

the Benchmark Checklist.

This product should be serviced regularly to optimise

its safety, efficiency and performance. The service en-

gineer should complete the relevant Service Record

on the Benchmark Checklist after each service.

The Benchmark Checklist may be required in the

event of any warranty work and as supporting do-

cumentation relating to home improvements in the

optional documents section of the Home Informa-

tion Pack.