Ariston EURO COMBI A/23 MFFI Instructions d'entretien - Page 12

Parcourez en ligne ou téléchargez le pdf Instructions d'entretien pour {nom_de_la_catégorie} Ariston EURO COMBI A/23 MFFI. Ariston EURO COMBI A/23 MFFI 32 pages. Erocombi
Également pour Ariston EURO COMBI A/23 MFFI : Manuel d'instructions d'installation (28 pages), Manuel d'instructions d'installation (24 pages), Manuel de l'utilisateur (16 pages)

40 50 60 70 80

Anti-cycling

Soft-light

Device

Adjustment

10. Remove the pipe from the pressure gauge and connect screw "C" to the

pressure outlet in order to seal off the gas.

11. Carefully check the pressure outlets for gas leaks (valve inlet

and outlet).

IMPORTANT!

Whenever you disassemble and reassemble the gas connections, always

check for leaks using a soap and water solution.

Setting the anti-cycling device

This appliance is equipped with a potentiometer which delays the ignition of

the heating control and is situated on the P.C.B. (see the electrical diagrams).

By adjusting the potentiometer, it is possible to change the time interval

between the burner shutting down and its next ignition.

Max. Heating

It is preset at 1 minute and can be adjusted from 0 to 2 minutes.

Adjustment

Use this control in particular situations where continuous shutting down and

ignition of the main burner occurs.

Fig. 1.27

Fig. 1.28

Removing the spark generator (SIT Sigma gas valve)

1. Disconnect ignition leads "Q" by pulling upwards

(see fig. 1.27) ;

2. Remove the screws "R" (see fig. 1.28) with a Pozidrive

No. 2 star tip screwdriver;

3. Remove the spark generator.

Fig. 1.29

B029