Ariston GENUS PREMIUM EVO HP 100 Instructions de conception, d'installation et d'entretien - Page 3
Parcourez en ligne ou téléchargez le pdf Instructions de conception, d'installation et d'entretien pour {nom_de_la_catégorie} Ariston GENUS PREMIUM EVO HP 100. Ariston GENUS PREMIUM EVO HP 100 44 pages. Wall-hung condensing
gas boiler hp
Également pour Ariston GENUS PREMIUM EVO HP 100 : Manuel de l'utilisateur (17 pages), Manuel de l'utilisateur (24 pages), Manuel de l'utilisateur (32 pages)
Imprimer la page
Advice for the installer
The installation and fi rst ignition of the boiler must be
performed by qualifi ed personnel in compliance with
current national regulations regarding installation, and
in conformity with any requirements established by
local authorities and public health organisations.
After the boiler has been installed, the installer must
ensure that the end user receives the declaration of
conformity and the operating manual, and should
provide all necessary information as to how the boiler
and the safety devices should be handled.
This appliance is designed to produce hot water for domestic use.
It should be connected to a heating system and a distribution
network for domestic hot water, both of which must be compatible
with its performance and power levels.
Genus Premium EVO HP is designed to work individually
or in cascade (max 8 devices - see Instructions manual
for Cascade).
The use of the appliance for purposes other than those specifi ed is
strictly forbidden. The manufacturer cannot be held responsible for
any damage caused by improper, incorrect and unreasonable use
of the appliance or by the failure to comply with the instructions
given in this manual.
Installation, maintenance and all other interventions must be
carried out in full conformity with the governing legal regulations
and the instructions provided by the manufacturer. Incorrect
installation can harm persons, animals and possessions; the
manufacturing company shall not be held responsible for any
damage caused as a result.
The boiler is delivered in a carton. Once you have removed all the
packaging, make sure the appliance is intact and that no parts are
missing. If this is not the case, please contact your supplier.
Keep all packaging material (clips, plastic bags, polystyrene foam, etc.)
out of reach of children as it may present a potential hazard.
In the event of a fault and/or malfunction, turn the appliance
off , turn off the gas cock and do not attempt to repair it yourself.
Contact a qualifi ed professional instead.
Before any maintenance or repair work is performed on the boiler,
make sure you have disconnected it from the electricity supply by
switching the external bipolar switch to the "OFF" position.
All repairs, which should only be performed using original spare
parts, should be carried out by a qualifi ed professional. Failure to
comply with the above instructions could compromise the safety
of the appliance and invalidate all liability on the part of the
manufacturer.
In the event of any maintenance or other structural work in the
immediate vicinity of the ducts or fl ue gas exhaust devices and
their accessories, switch the appliance off by switching the external
bipolar switch to the "OFF" position and shutting off the gas valve.
When the work has been completed, ask a qualifi ed technician to
check the effi ciency of the ducting and the devices.
Turn the boiler off and turn the external switch "OFF" to clean the
exterior parts of the appliance.
Clean using a cloth dampened with soapy water. Do not use
aggressive detergents, insecticides or toxic products. If the
appliance is used in full compliance with current legislation, it
will operate in a safe, environmentally-friendly and cost-effi cient
manner.
If using kits or optional extras, make sure they are authentic.
CE labelling
The CE mark guarantees that the appliance conforms to the
following directives:
- 2009/142/CE relating to gas appliances
- 2004/108/CEE relating to electromagnetic compatibility
- 92/42/CEE relating to energy effi ciency
- 2006/95/CEE relating to electrical safety
overview
3