Ariston STI 210 INDIRECT Manuel d'instructions d'installation - Page 15
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} Ariston STI 210 INDIRECT. Ariston STI 210 INDIRECT 20 pages. Unvented hot water storage cylinders
Également pour Ariston STI 210 INDIRECT : Manuel de l'utilisateur (16 pages), Instructions pour le manuel d'installation (24 pages)
Imprimer la page
4.2
C
P
ONTROL
ANEL
L
:
EGEND
A - On/Off button
B - On/Off L.E.D. green (frost protection active)
C - Central Heating button
D - Cental Heating active L.E.D. green
E - Ignition failure (lockout) and/or overheat reset button
F - Ignition failure (lockout) and/or overheat L.E.D. red
G - Central heating temperature adjustment
H - Energy Saving System (ESS)
- Knock-out for time clock
I
J - Heating system pressure gauge
4.3
R
EMOVING THE
F
P
RONT
ANEL
1
A
2
3
Supplied By www.heating spares.co Tel. 0161 620 6677
F
. 4.1
IG
In order to access the inside of the boiler, it is necessary to
unscrew the fastening screws "A" of the control panel located on
the lower part of the panel itself.
The control panel moves downward and when pulled forward
rotates on two lateral hinges.
The panel stays in a semi-horizontal position, which allows
access to the inner parts of the boiler.
In order to increase the manoeuvring space, it is possible to raise
the control panel and rotate it to a fully horizontal position.
To dismantle the front casing panel it is necessary to:
1 - Remove the two screws "B";
2 - Move the front casing panel up and lift forward.
4
5
15
B