Ariston FA3S 841 P IX A AUS Manuel de référence quotidien - Page 9
Parcourez en ligne ou téléchargez le pdf Manuel de référence quotidien pour {nom_de_la_catégorie} Ariston FA3S 841 P IX A AUS. Ariston FA3S 841 P IX A AUS 13 pages.
Imprimer la page
CLICK & CLEAN - CLEANING THE GLASSES
1. After removing the door and resting it on a soft
surface with the handle downwards, simultaneously
press the two retaining clips and remove the upper
edge of the door by pulling it towards you.
2. Lift and firmly hold the inner glass with both
hands, remove it and place it on a soft surface before
cleaning it.
TROUBLESHOOTING
PROBLEM
The oven is not working.
The display shows the letter "F"
followed by a number or letter.
The display is showing the
message "Hot" and the selected
function will not start.
PRODUCT FICHE
The product fiche with energy data of this
WWW
appliance can be downloaded from the website
www. aristonchannel. com
HOW TO OBTAIN THE USE AND CARE GUIDE
>
Download the Use and Care Guide
WWW
from our website www. aristonchannel. com
(you can use this QR Code), specifying the
product's commercial code.
> Alternatively, contact our Client After-sales Service.
POSSIBLE CAUSE
Power cut.
Disconnection from the mains.
Oven failure.
Temperature too high.
3. Refit the intermediate pane (marked with "1R")
before refitting the inside pane: To position the panes
of glass correctly, make sure that the "R" mark can be
seen in the left-hand corner. First insert the long side
of the glass marked "R" into the support seats, then
lower it into position. Repeat this procedure for both
panes of glass.
4. Refit the upper edge: A click will indicate correct
positioning. Make sure the seal is secure before
refitting the door.
SOLUTION
Check for the presence of mains electrical power and whether
the oven is connected to the electricity supply.
Turn off the oven and restart it to see if the fault persists.
Contact you nearest Client After-sales Service Centre and state
the number following the letter "F".
Allow the oven to cool down before activating the function.
Select a different function.
CONTACTING OUR AFTER-SALES SERVICE
You can find our
contact details in the
warranty manual. When
contacting our Client
After-sales Service,
please state the codes
provided on your
product's identification plate.
XXXXXXXX X XX
XXXXXX XXXXXX
Model: xxxXXXXxx
XXXXXXXXX X X X
XXXXXXXXXX
XXXXXXXXXX
XXXXXX
9
EN
XXXXX XXXXXXX