AEP MP2x8i NMEA Buffer Manuel d'installation et d'utilisation - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} AEP MP2x8i NMEA Buffer. AEP MP2x8i NMEA Buffer 9 pages. Buffer
Également pour AEP MP2x8i NMEA Buffer : Manuel d'installation et d'utilisation (2 pages)

AEP MP2x8i NMEA Buffer Manuel d'installation et d'utilisation
Single input transmission with auto switching:
Auto mode works as a regular buffer with 1 input and 8 outputs. It has automatic switching to input 2 if input 1 stops to receive
the data (signal loss). Automatic switch will occur within approximately 30 seconds after the signal of input 1 is lost. Switching
back to input 1 occurs immediately after signal is restored.
LED (red) operating mode:
Input 1 LED and input 2 LED will blink simultaneously when the data is received and transmitted to the output.
Power LED: Continuous lit when input power is detected.
Figure 3: Single input transmission with auto switching
P 6/9