Ariston HT 60 XA Manuel d'utilisation - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Ariston HT 60 XA. Ariston HT 60 XA 6 pages.

INSTALLATION

Electrical Connection

• The electrical connections must comply with local regulations.

• The data relevant to the voltage and power absorption are indicated

on the rating plate.

• The earthing of this appliance is compulsory by law. The manufacturer

cannot be held responsible for injury to persons or animals or damage

to property arising from failure to comply with these requirements.

• When the appliance is installed, provide a multi-pole circuit breaker

with a contact separation (at least 3 mm) in all poles that provide

full disconnection under overvoltage category III and must be

incorporated in the fixed wiring in accordance with the national

wiring rules.

• After installation, the electric parts must not be accessible.

• For electrical connection, use an H05RR-F cable (see table in product

description sheet).

• The power cable must be long enough for connecting the appliance,

once fitted in its housing, to the power supply.

• The electrical components must not be accessible to the user after

installation.

ELECTRICAL COOKING HOBS WITH SIDE CONTROLS

Connection to terminal board

1. Open the cover of the terminal board and loosen screw A by means of a

tool, as shown in the figure.

2. Unsheathe the cable for about 70 mm.

3. Peel off the internal cables for about 10 mm loosen cable clamp screw B,

and insert the cable in the cable clamp.

• The terminal board has 4 terminals:

1-2 interconnected (line)

3 (neutral)

4 (earth): marked with symbol

4. Connect the cable to the terminal board, following the indications of

the connection diagram punched on the bottom of the cooking hob.

Fasten the cable clamp and close the cover.