Whirlpool 3953950A Manuel d'utilisation et d'entretien - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'entretien pour {nom_de_la_catégorie} Whirlpool 3953950A. Whirlpool 3953950A 12 pages. Resource saver automatic washer
Imprimer la page
Starting Your Washer
Fire Hazard
Never place items in the washer that are
dampened with gasoline or other flammable
fluids.
No washer can completely remove oil.
Do not dry anything that has ever had any type of
oil on it (including cooking oils).
Doing so can result in death, explosion, or fire.
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in
death, fire, or electrical shock.
1. Measure detergent and pour it into the washer. If desired, add
powdered or liquid color safe bleach. Use less detergent
when using a small load size.
Drop a sorted load of clothes loosely into your washer.
Load evenly to maintain washer balance. Mix large and
small items.
Items should move easily through the wash water.
Overloading can cause poor cleaning.
To reduce wrinkling of permanent press clothes and some
synthetic knits, use a large load size to provide more
space (see step 4).
6
2. (OPTIONAL STEP) Pour measured liquid chlorine bleach into
the liquid chlorine bleach dispenser. Bleach will be dispensed
automatically during the wash part of the cycle. See "SMART
BLEACH™ Timed Bleach Dispenser."
Never use more than 1 cup (250 mL) for a full load. Use
less with a smaller load size.
Follow the manufacturer's directions for safe use.
To avoid spilling, use a cup with a pouring spout. Do not
let bleach splash, drip, or run down into the washer
basket.
Use only liquid chlorine bleach in this dispenser.
3. Close the washer lid.
4. Turn the LOAD SIZE selector to the correct setting for your
wash load and the type of fabric being washed.
Choose a load size that allows the load to move freely for
best fabric care. See "Loading."
You may change the load size selection after the washer
has started filling by turning the selector to a different
setting.
5. If a Soak or Prewash cycle is desired, set the SOAK/
PREWASH TEMPERATURE selector to the desired setting.
Match the water temperature with the type of fabrics and
soils in your load.
The water temperature for this cycle is not regulated with
the ACCUWASH™ Temperature Control System.
Water Temp
Use For
Hot
Whites and pastels
111°F (44°C)
Heavy soils
or above
Warm
Bright colors
90°-110°F
Moderate to light soils
(32°-43°C)
Cold
Colors that bleed or fade
70°-90°F
Light soils
(21°-32°C)
6. Select a Normal wash temperature or a Rinse & Spin
temperature with the NORMAL/RINSE & SPIN
TEMPERATURE selector.
Match the water temperature with the type of fabrics and
soils in your load.
Your washer uses ACCUWASH™ temperature control to
regulate incoming hot and cold water in the Normal wash
cycle and Rinse & Spin cycle. See "ACCUWASH
Temperature Control System."