Whirlpool 3RLSQ8000 Manuel d'utilisation et d'entretien - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'entretien pour {nom_de_la_catégorie} Whirlpool 3RLSQ8000. Whirlpool 3RLSQ8000 12 pages. Easy-to-use automatic washer
Également pour Whirlpool 3RLSQ8000 : Instructions d'installation (5 pages)
Imprimer la page
WARNING
Fire Hazard
Never place items in the washer that are dampened
with gasoline or other flammable fluids.
No washer can completely remove oil.
Do not dry anything that has ever had any type of oil on
it (including cooking oils).
Doing so can result in death, explosion, or fire.
WARNING
Electrical Shock Hazard
Plug into a grounded (earthed) outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
1. Measure detergent and pour it into the washer. If desired, add
powder or liquid color safe bleach. Add extra detergent for
the Super Wash/Heavy cycle.
Drop a sorted load of clothes loosely into your washer.
6
Starting Your Washer
Load evenly to maintain washer balance. Mix large and
small items.
Items should move easily through the wash water.
Overloading can cause poor cleaning.
To reduce wrinkling of permanent press clothes and some
synthetic knits, use a large load size to provide more
space (see Step 5).
2. (OPTIONAL) Pour measured liquid chlorine bleach into the
liquid chlorine bleach dispenser. Bleach will be diluted
automatically during the wash part of the cycle.
Do not use more than 1 cup (250 mL) for a full load. Use
less with a smaller load size.
Follow the manufacturer's directions for proper use.
To avoid spilling, use a cup with a pouring spout. Do not
let bleach splash, drip, or run down into the washer
basket.
Use only liquid chlorine bleach in this dispenser.
3. (OPTIONAL) Pour measured liquid fabric softener into the
liquid fabric softener dispenser. Softener is added
automatically during the rinse portion of the cycle.
Dilute liquid fabric softener by filling the dispenser with warm
water until liquid reaches the crossbar in the opening.
Do not spill or drip any fabric softener on the clothes.
Use only liquid fabric softener in this dispenser.
4. Close the washer lid.
5. Turn the LOAD SIZE selector to the correct setting for your
wash load and the type of fabric being washed.
Choose a load size that allows the load to move freely for
best fabric care. See "Loading."
You may change the load size selection after the washer
has started filling by turning the selector to a different
setting.