Whirlpool 4GWTW5500 Manuel d'utilisation et d'entretien - Page 13

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'entretien pour {nom_de_la_catégorie} Whirlpool 4GWTW5500. Whirlpool 4GWTW5500 50 pages. Top-loading high efficiency low-water washer

Imprimer la page

TROUBLESHOOTING

Electrical

Shock Hazard

Plug into a grounded (earthed} outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension

cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

First try the solutions suggested here to possibly avoid the cost of a service call.

if you experience

Possible

Causes

Check for proper water supply.

Washer won't run or fill,

washer stops working

or wash light remains

on (indicating that the

washer was unable to

fill appropriately)

Check proper electrical supply.

Normal washer operation.

Washer may be tightly packed.

Not using HE detergent or using too

much HE detergent.

Solution

Both hoses must be attached and have water flowing to

inlet valve.

Both hot and cold water faucets must be turned on.

Check that inlet valve screens have not become clogged.

Check for any kinks in inlet hoses, which can restrict water flow.

Plug power cord into a grounded outlet.

Do not use an extension cord.

Ensure there is power to outlet.

Reset a tripped circuit breaker. Replace any blown fuses.

NOTE: If problems continue, contact an electrician.

Lid must be closed for washer to run.

Washer will pause during certain phases of cycle.

Do not interrupt cycle.

Washer may be stopped to reduce suds.

The washer senses the dry load with short spins that may take

2 to 3 minutes before the water is added. You may hear the

hum of the spins. This is normal.

Remove several items, rearrange load evenly around the

washplate. Do not load garments directly over the center of the

washplate. Close lid and press Start/Pause/Unlock.

Add only 1 or 2 additional garments after washer has started.

Do not add more water to the washer.

Only use HE detergent. Suds from regular detergents can slow

or stop the washer. Always measure detergent and follow

detergent directions based on your load requirements.

To remove suds, cancel cycle. Select RINSE & SPIN. Press

START/Pause/Unlock.

Do not add more detergent,