Whirlpool 7MLSR6232JT2 Manuel d'utilisation et d'entretien - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'entretien pour {nom_de_la_catégorie} Whirlpool 7MLSR6232JT2. Whirlpool 7MLSR6232JT2 28 pages. Whirlpool automatic washers use & care guide

Imprimer la page

Starting Your Washer

Fire Hazard

Never place items in the washer that are

dampened with gasoline or other flammable

fluids.

No washer can completely remove oil.

Do not dry anything that has ever had any type of

oil on it (including cooking oils).

Doing so can result in death, explosion, or fire.

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in

death, fire, or electrical shock.

1. Measure detergent and pour it into the washer. If desired, add

powdered or liquid color safe bleach.

Drop a sorted load of clothes loosely into your washer.

Load evenly to maintain washer balance. Mix large and

small items.

Items should move easily through the wash water.

Overloading can cause poor cleaning.

To reduce wrinkling of permanent press clothes and some

synthetic knits, use a large load size to provide more

space (see step 4).

2. (OPTIONAL STEP) Pour measured liquid chlorine bleach into

the liquid chlorine bleach dispenser (on some models).

Bleach will be diluted automatically during the wash part of

the cycle.

Never use more than 1 cup (250 mL) for a full load. Use

less with a smaller load size.

Follow the manufacturer's directions for safe use.

To avoid spilling, use a cup with a pouring spout. Do not

let bleach splash, drip, or run down into the washer

basket.

Use only liquid chlorine bleach in this dispenser.

NOTE: On models without a bleach dispenser, see "Adding

Liquid Chlorine Bleach."

3. Close the washer lid.

4. Turn the Tamaño de Carga (LOAD SIZE) selector (on some

models) to the correct setting for your wash load and the type

of fabric being washed.

Choose a load size that allows the load to move freely for

best fabric care. See "Loading."

You may change the load size selection after the washer

has started filling by turning the selector to a different

setting.

5. Set the Temperatura (TEMPERATURE) selector (on some

models) to the correct setting for the type of fabric and soils

being washed. Use the warmest water safe for fabric. Follow

garment label instructions.

NOTE: On models with temperature selections in the Cycle

Control knob, see "Cycle Time and Temperature Options" in

the "Selecting a Cycle and Time" section.

Water Temp.

Use For

Caliente (Hot)

Whites and pastels

111°F (44°C)

Heavy soils

or above

Tibio (Warm)

Bright colors

90°-110°F

Moderate to light soils

(32°-43°C)

Frío (Cold)

Colors that bleed or fade

70°-90°F

Light soils

(21°-32°C)

NOTE: In wash water temperatures colder than 70ºF

(21ºC), detergents do not dissolve well. Soils can be difficult

to remove. Some fabrics can retain wear wrinkles and have

increased pilling (the formation of small lint-like balls on the

surface of garments).