Whirlpool 7MWTW1950EW Manuel d'utilisation et d'entretien - Page 25
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'entretien pour {nom_de_la_catégorie} Whirlpool 7MWTW1950EW. Whirlpool 7MWTW1950EW 33 pages. Top-loading washer
Également pour Whirlpool 7MWTW1950EW : Manuel d'instructions d'installation (16 pages)
Imprimer la pageNON-USE AND VACATION CARE
Operate your washer only when you are home. If moving,
or not using your washer for a period of time, follow these
steps:
1. Unplug or disconnect power to washer.
2. Turn off water supply to washer, to avoid flooding due
to water-pressure surge.
WINTER STORAGE CARE
IMPORTANT: To avoid damage, install and store washer
where it will not freeze. Because some water may stay in
hoses, and freezing can damage the washer. If storing or
moving during freezing weather, winterize your washer.
To winterize washer:
1. Shut off both water faucets; disconnect and drain
water inlet hoses.
2. Put 1 quart (1 L) of R.V.-type antifreeze in basket and run
washer on Enjuagar y Exprimir (Rinse & Spin) cycle for
about 30 seconds to mix antifreeze and remaining water.
3. Unplug washer or disconnect power.
TRANSPORTING YOUR WASHER
1. Shut off both water faucets. Disconnect and drain
water inlet hoses.
2. If washer will be moved during freezing weather, follow
"Winter Storage Care" directions before moving.
3. Disconnect drain hose from drain system and drain any
remaining water into a pan or bucket. Disconnect drain
hose from back of washer.
4. Unplug power cord.
5. Place inlet hoses and drain hose inside washer basket.
6. Drape power cord over edge and into washer basket.
7. Place packing tray from original shipping materials back
inside washer. If you do not have packing tray, place
heavy blankets or towels into basket opening. Close
lid and place tape over lid and down front of washer.
Keep lid taped until washer is placed in new location.
Transport washer in upright position.
REINSTALLING/USING WASHER AGAIN
To reinstall washer after non-use, vacation, winter storage,
or moving:
1. Refer to Installation Instructions to locate, level, and
connect washer.
2. Before using again, run washer through the following
recommended procedure:
To use washer again:
1. Flush water pipes and hoses. Reconnect water inlet
hoses. Turn on both water faucets.
2. Plug in washer or reconnect power.
3. Run washer through Edredones (Bulky Items) cycle to
clean washer and remove antifreeze if used. Use half the
manufacturer's recommended amount of HE detergent
for a medium-size load.
ENVIRONMENTAL INFORMATION
Packaging
In its new projects, Whirlpool used recyclable and easily
separated material in its packaging, making it possible for
consumers to dispose of plastic bags, expanded polystyrene
pieces and cardboard consciously, preferably sending them to
recyclers.
Product
This product was built with materials that can be recycled
and/or reused. Therefore, when disposing of this product, look for
companies specialized in disassembling them correctly.
Disposal
When disposing of this product at the
end of its useful life, we require that
you fully consult the local legislation in
force in your region so that disposal is
carried out in full compliance with existing
regulations. You should not dispose
of the product with general household
waste. For more information, contact your
local authority or the store where you
purchased the product.
25