Whirlpool 7MWTW1955EW Manuel d'utilisation et d'entretien - Page 19

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'entretien pour {nom_de_la_catégorie} Whirlpool 7MWTW1955EW. Whirlpool 7MWTW1955EW 33 pages. Top-loading washer

Control Panel and Features

1
LLENADO PROFUNDO (DEEP FILL)
1
This option adds more water to the cycle, providing a deeper
fill.
TEMPERATURA (TEMPERATURE)
2
Temperature senses and maintains uniform water
temperatures by regulating incoming hot and cold water.
Select a wash temperature based on the type of fabric
and soils being washed. For best results and following the
garment-label instructions, use the warmest wash water safe
for your fabric.
Ƀ
On some models and cycles, warm and hot water may
be cooler than your previous washer.
Ƀ
Even in a cold- and cool-water wash, some warm water
may be added to the washer to maintain a minimum
temperature.
WASH CYCLE KNOB
3
Use the Wash Cycle knob to select cycles on your washer.
See "Cycle Guide" for detailed descriptions of cycles.
NIVEL DE SUCIEDAD (SOIL LEVEL)
4
Select the setting most suitable for your load. For heavily
soiled and sturdy fabrics, select Muy Sucio (Heavy) for more
wash time. For lightly soiled and delicate fabrics, select
Ligero (light) or Extra Ligero (extra light) for less wash time.
A lighter soil-level setting will help reduce tangling and
wrinkling.
ENJUAGUE ADICIONAL(EXTRA RINSE)
5
This option can be used to automatically add a second rinse
to most cycles.
INICIO/PAUSA (START/PAUSE) BUTTON
6
Press to start the selected cycle; press again to pause the
cycle and unlock the lid.
NOTE: Hold the Inicio/Pausa (Start/Pause) button for
3 seconds to cancel the wash cycle.
PROGRESS INDICATOR LIGHTS
7
Etapas de Lavado
The progress indicator lights show the status of a cycle. At
each stage of the process, you may notice sounds or pauses
different from traditional washers.
2
Not all features and options are available on all models.
Appearance may vary.
3
7
6
Llenando (Sensing Fill)
When the Inicio/Pausa (Start/Pause) button is pressed, the
washer will fill to an initial water level and begin sensing to
determine the load size. The washer will then continue filling
to the appropriate water level based on load size and proceed
to Wash.
If the lid is opened or the Inicio/Pausa (Start/Pause) button is
pressed, the cycle will pause. Closing the lid and/or pressing
the Inicio/Pausa (Start/Pause) button will resume the cycle. If
the cycle remains paused with the lid open for
10 minutes, the washer will pump out the water.
Lavado (Wash)
You will hear the agitator moving the load. The motor sounds
may change at different stages in the cycle. Wash time is
determined by the selected soil level.
Enjuague (Rinse)
You will hear sounds similar to the wash cycle as the washer
rinses and moves the load. You may hear the motor turning
on briefly (short hum) to move the basket while filling.
Drenado/Exprimido (Drain/Spin)
The washer spins the load at increasing speeds for proper
water removal based on the selected cycle.
Listo (Done)
Once the cycle is complete, this light will come on. For best
results, promptly remove the load.
Tapa (Lid Lock)
The lid-lock feature allows for higher spin
speeds. When lit, the lid is locked and cannot
be opened without pausing the cycle. When
the light is off, the lid can be opened.
To open the lid after it has been locked, press
Inicio/Pausa (Start/Pause). The lid will unlock
once washer movement has stopped. This
may take several minutes if the load was
high speed.
spinning at
(Start/Pause) while the lid is closed to resume
the cycle.
NOTE: Holding the Inicio/Pausa (Start/Pause) button will
cancel the cycle and cause the washer to drain.
Avoid opening the lid during sensing. The sensing process
will start over when the washer is restarted.
4
5
Press Inicio/Pausa
19