Whirlpool 8182192 Manuel d'utilisation et d'entretien - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'entretien pour {nom_de_la_catégorie} Whirlpool 8182192. Whirlpool 8182192 44 pages. Front-loading automatic washer

Imprimer la page

Always measure liquid chlorine bleach. Use a measuring cup

with a pour spout; do not guess.

Do not fill beyond the "MAX" level. Overfilling could cause

severe garment damage.

Fabric Softener

compartment

(Number 6 in Dispenser Illustration)

Add 1/4cup (60 mL) liquid fabric softener to this compartment.

Fabric softener will be automatically

dispensed

in the final rinse.

•

Do not fill beyond the "MAX" level.

To pause the washer at any time, select PAUSE/CANCEL

To continue the cycle, select HOLD TO START (for

approximately

1 second).

Not all Options and Modifiers are available with all cycles. Cycles,

Options and Modifiers can be changed anytime before HOLD TO

START is selected.

Options and Modifiers can be changed anytime after HOLD TO

START is selected and before the start of the selected Option or

Modifier.

To cancel a cycle and select a new cycle

1. Select PAUSE/CANCEL twice.

2. Select desired cycle.

3. Select the desired OPTIONS.

4. Select HOLD TO START (for approximately

I second) to

restart the washer at the beginning of the new cycle.

To cancel a cycle

1. Select PAUSE/CANCEL twice.

2. The washer powers down, the door unlocks, and clothes can

be removed.

NOTE: If the water level or the temperature

is too high, the

washer will drain automatically

before the door unlocks.

To change Options or Modifiers after the cycle has started

1. Select PAUSE/CANCEL

2. Select the desired OPTIONS or MODIFIERS.

3. Select HOLD TO START (for approximately

1 second) to

continue the cycle.

To drain the washer manually

1. Select PAUSE/CANCEL

2. Select DRAIN/SPIN.

3. Select HOLD TO START (for approximately

1 second) to

begin the drain.

4. When the spin is complete, the door unlocks. Items can be

removed from the washer.

These lights show which portion of the cycle the washer is

operating. They also indicate when you can add an additional

item to the wash cycle and when the controls are locked.

Status

Q Delay Wash

@ Add a Garment

@ Soak/Prewash

• Wash

@ Rinse

• Spin

O Cycle Complete

@ Control Locked

Adding items

You can add items to the washer after the cycle has started for

Sanitary, Whitest Whites, Heavy Duty, Normal and Quick Wash, if

the ADD A GARMENT status light is glowing.

To add items

1. Select PAUSE/CANCEL. The washer door unlocks, and items

can be added.

2. To continue the cycle, close the door and select HOLD TO

START (for approximately

1 second).

Cycle Complete

The cycle complete light stays on for 5 minutes after the cycle is

complete, and then the washer shuts off.

Locking

controls

The Control Lock prevents unintended use of the washer. You

can also use the control lock feature to prevent unintended cycle

or option changes during a cycle. When CONTROL LOCKED is

lit, all buttons are disabled except for PAUSE/CANCEL and

START. You can lock the controls while the washer is operating.

To lock the controls

Select and hold END OF CYCLE SIGNAL for 3 seconds.

O Louder

•

Softer

o off

End

Ot Cycle

Signal

LocMUnlock Cor,tro3

The CONTROL LOCKED status light glows.

To unlock the controls

Select and hold END OF CYCLE SIGNAL for 3 seconds until the

CONTROL LOCKED status light turns off.

Estimated

time remaining

The cycle time varies automatically

based on your water

pressure, water temperature,

detergent and clothes load. The

cycle time will be extended if oversudsing

occurs or the load is

unbalanced.