Whirlpool 8212638RP Manuel du propriétaire Manuel - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire Manuel pour {nom_de_la_catégorie} Whirlpool 8212638RP. Whirlpool 8212638RP 29 pages.

Custom cabinet installation:

Drain System

The drain system can be installed using a floor drain, wall

standpipe, floor standpipe, or laundry tub. Select the method you

need.

IMPORTANT: To avoid siphoning, no more than 4.5" (114 mm) of

drain hose should be inside standpipe or below the top of wash

tub. Secure drain hose with cable tie.

Floor standpipe drain system

Minimum diameter for a standpipe drain: 2" (51 mm). Minimum

carry-away capacity: 17 gallon (64 L) per minute. A 1/4" (6 mm)

diameter to 1" (25 mm) diameter Standpipe Adapter Kit is

available (Part Number 3363920). Top of standpipe must be at

least 39" (991 mm) from the floor; install no higher than

96" (2.44 m) from bottom of machine. If you have an overhead

sewer and need to pump higher than 96" (2.44 m), a sump pump

and associated hardware are needed. See "Alternate parts."

Wall standpipe drain system

See requirements in the "Floor standpipe drain system" section.

Laundry tub drain System

Minimum capacity: 20 gallon (76 L). Top of laundry tub must be at

least 39" (991 mm) from the floor; install no higher than

96" (2.44 m) from bottom of machine.

Floor Drain System

Floor drain system requires a Siphon Break Kit, two Connector

Kits, and an Extension Drain Hose that may be purchased

separately. Please contact your retailer for ordering information, or

see the "Assistance or Service" on Quick Start Guide. Minimum

siphon break height: 28" (710 mm) from bottom of machine.

(Additional hoses may be needed.)