3Com 3C421600A Note de mise à jour - Page 7

Parcourez en ligne ou téléchargez le pdf Note de mise à jour pour {nom_de_la_catégorie} 3Com 3C421600A. 3Com 3C421600A 10 pages. Superstack ii remote access system 1500
Également pour 3Com 3C421600A : Manuel d'installation (6 pages)

Imprimer la page

List Connections

Command in the CLI

Using Fractional PRI

Creating A Network

Service

Refreshing Web

Configuration

Interface Data

Configuring Users

Once you have reassigned an IP address for your RAS 1500, use the

default user name "Admin" and the default password "Password"

when you configure features through the Web Configurator. You are

prompted to enter this user name and password when you select the first

feature, from the menu of features, that you want to configure. Both the

default user name and password will be overwritten once you set your

own unique manager user name and password. The user name must be

between 1 and 32 alphanumeric, nonblank characters and is

case-sensitive. The password must be between 1 and 15 characters and is

not case-sensitive.

Sometimes a

list connections

Interface) will scroll information. If this occurs, press <CTRL-C> to refresh

the screen.

If you are using fractional PRI, obtain from your telco, information on the

PRI line and the channels that are associated with that line. Configure a

specific modem group to include only those PRI members. Do not use

modem group all.

Creating a network service automatically creates a modem group with

the same name as the network service. This could cause a problem if a

modem group already exists with the same name. The modem group will

be overwritten with new information.

In order to ensure data between device and web browser is synchronized,

refresh the data in your web browser by clicking the reload or refresh

button. Do not leave the browser open on the desktop. When

configuration is complete exit out of the browser session.

To properly change a user's configuration, follow these general steps:

1 From the Web Configuration Interface, telnet to the CLI in the Router

Unit.

2 Disable the user.

3 Make the changes to the user's configuration.

4 Enable the user.

Operational Information

command from the CLI (Command Line